• Welcome to Bare Knuckle Pickups Forum.
 

Best P.U for a fuzz

Started by tomm, December 13, 2009, 11:45:27 AM

Previous topic - Next topic

tomm

i read that the fuzz was made for the single coils...so which is the best pick up for a huge fuzz tone?maybe a p-90(that is a bigger single coil)?

Twinfan

P90s and fuzz work very well if you like big fat tones  :)

Elliot

Its not that fuzz was actually made for singles, its just that low powered singles (i.e. under about 6k with alnicos) go really well with germanium - on 10 on the guitar volume the germanium imparts the fuzz tone we know and love but go to 8 on the guitar volume and it almost becomes clean.  For some reason that doesn't work so well with high gain singles or buckers.

Apart from that specific point on germanium fuzzes a P90 sounds great with a fuzz.
BKPS: Milks, P90s, Apaches, Mississippi Queens, Mules, PG Blues, BG FP 50s, e.60s strat custom set

tomm

thank u...so,only low output p-90 work well with fuzz?

ericsabbath

not for my ears, but people who like fuzz usually like p-90's
Riff Raff, Mules, Black Dog, VHII's, Cold Sweat

syr2012

I think P-90s cut through it better, humbuckers make fuzz mushy in my opinion.
BKP Team: Bridge MQ, Black. Bridge HD, Raw Nickel.
To Do: Bridge Nailbomb in chrome (?)

CaptainDesslock

Quote from: syr2012 on December 13, 2009, 07:55:29 PM
I think P-90s cut through it better, humbuckers make fuzz mushy in my opinion.

strangely enough I just got a neck MQ and it seems to not work well with fuzz.....now the A-bomb, well does wonders me thinks.
Rise above the crowds
Wade through toxic clouds
Breach the outer sphere
The edge of all our fears

tomm

i'm looking for this type of sound
http://www.youtube.com/watch?v=EFce5O-Z26U
Any suggestions?
i know he uses vintage voiced single coils (in humbuckers slots) ,but they are so thick...so i thought that the p-90 were a good idea....which pick up is the  a bomb?

Plexi Ken

IMO that tone has more to due with his pedals that his pickups. IIRC he uses a Big Muff and and adds a POG to get a big sound.

Big Muff
http://www.youtube.com/watch?v=NXcpqldmg_8

POG
http://www.youtube.com/watch?v=VB0LpX82SFs
A generous heart, kind speech and a life of service & compassion are the things which renew humanity

syr2012

Quote from: CaptainDesslock on December 13, 2009, 11:11:11 PM
Quote from: syr2012 on December 13, 2009, 07:55:29 PM
I think P-90s cut through it better, humbuckers make fuzz mushy in my opinion.

strangely enough I just got a neck MQ and it seems to not work well with fuzz.....now the A-bomb, well does wonders me thinks.

Maybe I should have elaborated, I wasn't going from personal experience, I'm a huge muse junkie, and I was comparing early fuzz to current (albeit used less) fuzz. It was quite mushy when Matt had those Motherbuckers, less so when he used Crunchboxes (but they're still high output ceramics), but at its best (imo) when he uses fuzz through a bridge MQ. I dunno if necks would work well with fuzz, they tend to be warm, and you need something a bit bright and cutting (again, imo).
BKP Team: Bridge MQ, Black. Bridge HD, Raw Nickel.
To Do: Bridge Nailbomb in chrome (?)

tomm

that's interesting...i don't looking for a very compressed or too metal,fuzz tone..and i don't want exactly the jack white's tone(because the most of it is in his old silvertone amp and national guitar)...maybe tha answer is a splitted humbucker or a p90(as the mq's)

heldatgunpoint

I can get a good jack white tone with MQs, his tone always has that jangle that sounds trashy distorted that you can only get with single coils, so MQs are the way to go.
Just use them with a big muff into a cleanish bright amp.