• Welcome to Bare Knuckle Pickups Forum.
 

American needs source for Nitrocellulose Lacquer. Help Please!

Started by broken cord, February 01, 2010, 07:55:26 PM

Previous topic - Next topic

broken cord

I have been looking for a source to get a quart of Pelham Blue Nitrocellulose Lacquer and can't seem to locate any in the US due to recent restrictions. Pelham Blue was a colour Gibson used in the '60's,' I am doing a refinish job on my SG and was hoping to secure some Nitro but it, seems as if I can only get acrylic lacquer. This is my last ditch effort.
Warpig/Mississippi Queen
Calibrated Painkillers
Nailbombs

Afghan Dave

"There's more knowledge on these boards than there are necks under PhillyQ's bed"

broken cord

Quote from: Afghan Dave on February 01, 2010, 08:02:53 PM
If it for the USA it's gotta be.

http://www.reranch.com/products.htm

Unfortunately Reranch only sells Nitro in the rattle cans. I want to do a professional job with a spray gun.

Thanks though.
Warpig/Mississippi Queen
Calibrated Painkillers
Nailbombs

mikeluke

You tried getting an auto repair shop to match the colour for you?
Mules, Riff-Raff

broken cord

Quote from: mikeluke on February 01, 2010, 09:46:12 PM
You tried getting an auto repair shop to match the colour for you?

I have asked a couple but they all work in acrylic lacquer now, and in 2012 all cars painted in the USA will have to use water base paints.
Warpig/Mississippi Queen
Calibrated Painkillers
Nailbombs

maverickf1jockey

Reminds me of Gil in The Simpsons;

"Now there ain't nothing going to take that finish off, now water; that'll just strip it right off..."

Providing you have enough patience you should be able to get a comparable result with domestic cans as you would with a gun; it's dependent on how much polishing you are willing to put in.
I too use chicken as a measurement.

Prawnik

Try sniffing around the ReRanch forum. A lot of people there who have forgotten more than I will ever know about guitar finishing, nitro, and vintage paints.

Afghan Dave

I've been reading a ton of stuff around this subject recently and I think you are gonna have to face the fact that many chemicals are now illegal.

Work with the plastic nitro all USA builders are using now but spray it thiner.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

broken cord

Quote from: Afghan Dave on February 02, 2010, 01:33:36 PM
I've been reading a ton of stuff around this subject recently and I think you are gonna have to face the fact that many chemicals are now illegal.

Work with the plastic nitro all USA builders are using now but spray it thiner.

It appers as if you hit the nail directly on the head Afgan Dave.  I can still get acrylic lacquer, however I was kinda hoping I could find a source somewhere in the cyber world of the BKP forum for nitro lacquer.
Warpig/Mississippi Queen
Calibrated Painkillers
Nailbombs

Afghan Dave

If it makes you feel better even late 50s guitars were grain sealed with a plastic wood filler so the cult of "letting the wood breathe" with nitro may have always been a little romantic...  :?
"There's more knowledge on these boards than there are necks under PhillyQ's bed"


broken cord

Warpig/Mississippi Queen
Calibrated Painkillers
Nailbombs