• Welcome to Bare Knuckle Pickups Forum.
 

1 Meg Pots?

Started by Afghan Dave, January 06, 2010, 11:49:07 PM

Previous topic - Next topic

Afghan Dave

Do any of you guys have 'em after replacing 500k?

Do they really open up a high power humbucker?

Where can I get ones suitable for guitar in the UK?

I've tried the usual suspects online and had no luck. The only one's I've found have been Dimarzio and quite frankly they seem overpiced in the UK.

I'd pay over the odds if I know that it makes a valuable difference but if it is just a hype I'll save the money and buy even better cable.

Just curious because I've been doing alot of rewiring in the cold months and I think I might be missing a trick not using 1 Megs in certain dark guitars.

It would be good to hear your experiences.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Philly Q

Never tried them, but WD and Allparts have CGE or CTS ones for 4 to 5 quid.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

FELINEGUITARS

Should have mentioned it on the phone Dave - I have new ones in stock
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Afghan Dave

Duh!!  :? :(

Sorry mate, I'll pick one up ASAP.

Are they worthwhile or am I just pissing about with too much time on my hands?
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

gwEm

#4
you sort of know if you need one i reckon. if your guitar is almost there and the top end could do with a bit of opening up they do work - not just with humbuckers by the way (i use one on my boss bridge).

you can experiment with what might happen by removing your tone control, or even volume pot. its not quite the same but it gives you an idea. if 1M doesn't work then 2M won't help you. think I have 1M pots on a couple of my collection. on many more guitars i went to 350k because it was sounding all too bright.

it doesn't affect the bass end, but it can give the feeling it does, you get more cut too.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Afghan Dave

Thanks... I'm gonna get one or two now I know Feline has them and give it a try.. Why not. :D
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Dreded

Maplins should carry them. I've once bought a DPDT 3-way, through eBay from a place called BitsBox, and their service was absolutely great. Well, I'm almost certain it's from them, as it does give their website address on the bag (www.bitsbox.co.uk) and their switches look remarkably like the one I've got, but it's been a while. A really speedy delivery and zero hassle whatsoever. Give 'em a look.