• Welcome to Bare Knuckle Pickups Forum.
 

Woods for custom guitar with C-Pig/Painkiller

Started by Stranger, May 31, 2010, 07:17:34 AM

Previous topic - Next topic

Stranger

I'm going to have a custom guitar built with C-Pig in the bridge and Painkiller in the neck.  I'm currently thinking mahogany body with maple topwood, and a five-piece maple/mahogany neck, but I'm open to other suggestions.  It's a guitar built for extreme metal, so I want some deep punch and bass.

Stranger

I'm down to mahogany or alder body.  I should be happy with maple/mahogany neck and maple topwood.  Opinions?  This guitar should be played with either an Engl Savage/Fireball or Diezel Herbert, though I'm not 100% decided.

FernandoDuarte

I'd think in mahogany + wenge neck laminations ^^

nfe

Wouldn't it make more sense to start with the body woods and then look at which pickups you want to fit a particular sound?  :?

Stranger

Quote from: nfe on June 08, 2010, 05:44:55 PM
Wouldn't it make more sense to start with the body woods and then look at which pickups you want to fit a particular sound?  :?
BK C-Pig is commonly accepted as the best pickup for my style of music, and I've really got BKP GAS, haha.  If I already had a particular guitar and was thinking about installing a BKP, then I would have to first consider the wood, but since this is going to be a custom I can get any wood I need that best resonates with the pickups I've chosen.  Mahogany and alder are both common woods chosen for metal geared guitars, and while I prefer mahogany's tone, someone has told me that the C-Pig has a better sound with alder.  Both woods are acceptable to me, I'm just looking for opinions and difference in tones with various woods with the C-Pig.

Does anybody backup this claim that C-Pigs sound better with alder bodies than mahogany?

Madsakre

Your music will never be as hard as this!

[url="http://www.youtube.com/watch?v=DfFrqhJwbhE"]http://www.youtube.com/watch?v=DfFrqhJwbhE[/url]
Cattlepress

Roobubba

Bubinga wings on a 5-piece maple-bubina-wenge-bubinga-maple neck-through with wenge top and ebony fretboard.

Next.
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

ratspeak

Maple neck-thru, mahogany wings. Got C-pig for my ESP horizon of that construction. Sounds awesome in a demo I heard of it used with the same guitar.

MDV

Quote from: Roobubba on June 09, 2010, 09:02:47 AM
Bubinga wings on a 5-piece maple-bubina-wenge-bubinga-maple neck-through with wenge top and ebony fretboard.

Next.


Ok

5pc blot on Mahogany/maple/walnut/mahogany neck with ebony board on a swamp ash body

And

5 pc through neck Dark red meranti/maple/walnut/maple/DRM with indian rosewood board, maple/DRM/maple laminate wings and a cocobolo top.
[URL=[url="http://www.facebook.com/pages/MDV-Productions/207971855966796%5DMDV"]http://www.facebook.com/pages/MDV-Productions/207971855966796]MDV[/url] Productions[/URL]

Nolly

The woods you selected in the OP should be great. The ceramic Warpig is nowhere near as dark as it's alnico counterpart, so I doubt you will have issues with that.

Roobubba

Quote from: MDV on June 09, 2010, 11:42:41 AM
Quote from: Roobubba on June 09, 2010, 09:02:47 AM
Bubinga wings on a 5-piece maple-bubina-wenge-bubinga-maple neck-through with wenge top and ebony fretboard.

Next.


Ok

5pc blot on Mahogany/maple/walnut/mahogany neck with ebony board on a swamp ash body

And

5 pc through neck Dark red meranti/maple/walnut/maple/DRM with indian rosewood board, maple/DRM/maple laminate wings and a cocobolo top.

Yup, that's also got to sound awesome!
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

MDV

[URL=[url="http://www.facebook.com/pages/MDV-Productions/207971855966796%5DMDV"]http://www.facebook.com/pages/MDV-Productions/207971855966796]MDV[/url] Productions[/URL]

FernandoDuarte

I'd totally change the maple for Wenge... even Padouk...

MDV

Hes good with the maple. Maple/mahogany laminate is great for metal; depth and punch and definition and clarity, plus rigidity, so vibration transmission and stability. Its a winner.
[URL=[url="http://www.facebook.com/pages/MDV-Productions/207971855966796%5DMDV"]http://www.facebook.com/pages/MDV-Productions/207971855966796]MDV[/url] Productions[/URL]