• Welcome to Bare Knuckle Pickups Forum.
 

Inappropriate Amp gas

Started by WezV, January 29, 2012, 08:56:15 PM

Previous topic - Next topic

msplines

Do you know what valves are fitted? - perhaps yellow jacket or similar adaptors for EL84s could be good for pain free lower volume cranking.

sgmypod

Nice buy wez, always loved sound of these, never found one in good enough nick to buy though
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

WezV

well i picked it up tonight.

I am happy.  It does have a bit of background hum i want to get sorted, but it is just background noise and no where near as bad as i was expecting.  the pots are just a bit crackly from lack of use.  cosmetically its almost perfect, just a bit of muck here and there

will have a proper look inside at some point but i doubt any original valves are still in there - he mentioned it had been serviced about 7 years ago and had some caps replaced at that point.


very happy, especially for less than £150  :)
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Ian Price

Quote from: WezV on February 01, 2012, 09:39:44 PM
very happy, especially for less than £150  :)

:o

Sounds like an absolute steal!
I think I hate being indecisive.

38thBeatle

I am sure I remember someone someone I played with (I can't remember who it was) having one of those back in the day. I wish I could remember more about the sound.
Send three and fourpence we're going to a dance
BKP's: Apache, Country Boy, Slowhands.

HTH AMPS

Quote from: WezV on February 01, 2012, 09:39:44 PM
well i picked it up tonight.

I am happy.  It does have a bit of background hum i want to get sorted, but it is just background noise and no where near as bad as i was expecting.  the pots are just a bit crackly from lack of use.  cosmetically its almost perfect, just a bit of muck here and there

will have a proper look inside at some point but i doubt any original valves are still in there - he mentioned it had been serviced about 7 years ago and had some caps replaced at that point.


very happy, especially for less than £150  :)

Post some gut shots and I'll tell you if the smoothing caps on the HT line are original or not.

If they ARE original, a cap job is in order.  It's worth cleaning the pots, jacks and valve bases too - Servisol lubricant spray for the pots, and non-lubricating for the jacks/valve bases.  You'll be amazed at how much snap/crackle/pop can be reduced by such simple maintenance.

It's also worth replacing the bias caps while you're at it.

[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

WezV

Quote from: HTH AMPS on February 02, 2012, 11:25:52 AM
Post some gut shots and I'll tell you if the smoothing caps on the HT line are original or not.

here we go




[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

HTH AMPS

You've made out ok there Wez, those EL34s look like old Siemens ones - great midrange crunch and spit, snarly as fook  :D

The smoothing caps are the originals, but it's tough to see what kind of shape they're in.  My thoughts are that on a 40+ year old amp, it makes sense to replace all the filter caps.  Also do the bias cap while you're at it. 

Looks nice and clean inside too, makes a change for Selmers which are normally woefully looked after.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

WezV

Well a service and any mods may have to wait a few weeks, but i just borrowed some TAD tone Bones from a mate which  are a plug and play option to reduce this down to about 8w. 

BAsically the EL34's get swapped for 84's.  but since it doesnt need to be re-biased to do the EL34's can be slotted back in at any time

Its still loud, as 8 valve watts should be - but the first 3rd of the volume sweep is now suitable for home use as opposed to just turning it on its lowest setting.

I think the Tone bones along with a PPIMV should let me get the most out of the amp at home volumes.  Whilst it may be changing the amps character a bit its still bloody nice and the stock sounds are still available if needed.
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]