• Welcome to Bare Knuckle Pickups Forum.
 

Marhsall Power Amp Problem (9100)

Started by Muttley, February 07, 2006, 12:44:14 PM

Previous topic - Next topic

Muttley

Hi,

Any tube amp gurus here?

My 9100 (50W/50W valve power amp) has started gving me some problems.  One channel works fine, but the other side is completely silent until I crank the volume way up at which point it kicks into life and I scare the living bejesus out of anyone in the vicinity (including myself sometimes).  ;)

Any ideas what could be causing this, and if it's easy to fix?  I'd rather not send it off for repair if possible, as I'd probably have to take out another mortgage to pay the shipping it's so damn heavy.  :P

Cheers

Muttley

maliciousteve

you should send it to me  :D

Could be a dirty pot/switch? i get the same kinda problem with my marshall head just not as bad

Muttley

All fixed now.

When Stewart at Award-Session opened it up he saw some dodgy soldering which he repaired before even turning the amp on.  When that was done and he powered the amp up the fault was gone.  :D

Muttley