• Welcome to Bare Knuckle Pickups Forum.
 
Main Menu

Pickup wiring

Started by JMW1312, April 01, 2013, 10:36:43 PM

Previous topic - Next topic

JMW1312

Hi, accidently posted this in the wrong place. I need a wiring diagram or something for a strat I am modding. I am putting a P90 in the bridge (no other pickups), a single volume an a single tone control, also adding a killswitch. Any help given would be greatly appreciated. Cheers

MrBump

Can't help with a diagram for that particular setup - the Seymour Duncan site is usually pretty good for that stuff.

But I wanted to say - what an awesome set up that would be!
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

JMW1312

Cheers, I'll have a look on Seymour Duncan but it's gonna be difficult to find. Thanks for the help.

Philly Q

I can't find a diagram for the exact scheme you're after, but basically you can combine these two diagrams, for a single pickup with the kill switch inserted between the pickup and the jack:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1hum_1vol_1tone

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=kill_switch

The P-90 will work with 500k pots like a humbucker, or you could use a 500k volume and 250k tone like some vintage Les Paul Junious.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

JMW1312

Cheers Phlliy, I was thinking about going for a 550K pot from BK

Philly Q

BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM