• Welcome to Bare Knuckle Pickups Forum.
 

Got my Mules - *updated!*

Started by Paladin2019, June 21, 2006, 01:42:35 PM

Previous topic - Next topic

Paladin2019

I got my mules in the post this morning, but I can't remember specifying over the phone which magnets I wanted when I ordered. What are they as standard?

steve

Mule,Trilogy,Irish Tours,Holy Diver and Apaches.

Dave Simpson

Mine are Alnico IV as well. PDT_003
BKP's: Nailbomb, Miracle Man, Cold Sweat, Mother's Milk, Mule, Rebel Yell, Crawler

Paladin2019

Perfect.  8)

I've booked a day off on Friday to install them and generally mess around afterwards so I'll let y'all know how I get on!

Dave Simpson

The Mule is becoming one of my favorite BKP models. Handles the super gain thing no problem and has a clean tone that is so beautiful it brings me to tears. PDT_041
BKP's: Nailbomb, Miracle Man, Cold Sweat, Mother's Milk, Mule, Rebel Yell, Crawler

COMKEEN

I ordered a set of Stormy Mondays and received a card with warranty informations and an installation guide along with the pickups. The card also contained the specifications, i. e. DC and magnet types, of both the bridge and the neck pickup...
To get a new monitor, hammer a nail in here -----> [X]

Paladin2019

Quote from: COMKEENI ordered a set of Stormy Mondays and received a card with warranty informations and an installation guide along with the pickups. The card also contained the specifications, i. e. DC and magnet types, of both the bridge and the neck pickup...

I haven't actually seen them yet, had them delivered to a relative as I was going to be in work when they arrived. Good to know the info is there though.

froglord

Are you going for the coil tap option? They sound pretty nice tapped.
Mules (Eggle Berlin), Piledriver/Yardbird (CV Tele Thinline)
Egnater Tweaker 15

jt

:D The Mules are a great allrounder, if your unsure of what type of P/U`s to get then allways start with a set of Mules. They can handle anything  you can throw at `em !!

Oh yer & mine are A IV as well

:D  8)
God I could do with a Gin & Tonic !

froglord

I don't think Tim uses Alnico II in the Mules unless you specifically ask for it.
Mules (Eggle Berlin), Piledriver/Yardbird (CV Tele Thinline)
Egnater Tweaker 15

Paladin2019

Quote from: froglordAre you going for the coil tap option? They sound pretty nice tapped.

Full jimmy page suite - individual taps, in/out of phase, and both in series.

I've got that setup already with the Duncan Alnico 2 pro's in there right now, so it shouldn't be too hard to fit. It'll be a good excuse to clean up my messy wiring job too.

The APH's are nice tapped, but are a little weedy. I have great hopes for the mules though.  :D

froglord

Blimey. And I thought I was nuts going for 9 options (series, parallel, tapped times the three pickup positions). I had to work out the wiring diagram for myself, so I had no guarantees that it would work, but thankfully it did.

With hindsight, I'd skip the "humbuckers in parallel" option. Now I know why nobody wires humbuckers this way - they sound like single coils, but with all of the nice treble detail sucked out.

Of course, I could re-wire that position on the rotary switch to something else ...
Mules (Eggle Berlin), Piledriver/Yardbird (CV Tele Thinline)
Egnater Tweaker 15

Paladin2019

Quote from: froglordBlimey. And I thought I was nuts going for 9 options (series, parallel, tapped times the three pickup positions). I had to work out the wiring diagram for myself, so I had no guarantees that it would work, but thankfully it did.

Luckily the JP scheme is all over the net in its various guises, plus my tech laid a lot of the groundwork with a sililar scheme minus the series  option in my old epiphone, so it wasn't hard to work out what I had to do. 22 possible combinations in there now, and which ones do I use most? That's right, neck middle and bridge.  :lol:

There's some great sounds in there if you tinker though; I wouldn't go back to stock even though it would probably improve the basic sound. There's something about the les paul that demands extravagance. 8)

Interesting that you should say that about your parallel option. Most people I speak to seem to prefer parallel for singl coil sounds because of the lack of hum. I only went with tapped rather than parallel because it worked better with my other switching options and I could use CTS push-pull pots with it. Having said that, I've never actually heard a parallel hummer so just ignore me  :wink:

Paladin2019

Well, I've put them in my les paul and, luckily, they worked first time!

They're everything I hoped for - rich and lively, far more representative of the unplugged character of the guitar. The neck is smooth and defined, the bridge really has the kick I was looking for without losing clarity. Coil tapped and out of phase they sound absolutely delicious.

This is all based on playing through a v-amp while tinkering with relative heights. I haven't even plugged into the Cornford yet. Why am I still here?

Back later!  :lol:  8)