• Welcome to Bare Knuckle Pickups Forum.
 

3 Hum Toggle Switch Wiring

Started by Tricalibur, August 01, 2006, 09:08:01 PM

Previous topic - Next topic

Tricalibur

Im wanting to upgrade all the electronics on my epi Sg Custom and have been tryin all day to find a suitable 3-way toggle switch that is designed for 3 p/u guitars with little luck. The wiring I want is Back Position= Neck and Middle pups, Middle Position= All Pups, Forward= Middle and Bridge pups. Could I just use any 3 way toggle switch to achieve this type of wiring or would I need a special kind?
<The Warpigs Are Coming, Hide your Children... and bring BBQ Sauce>

CaffeineJunkie

i'm fairly sure that the SG custom uses that config....

http://www.guitarvillage.co.uk/product-detail.asp?id=2088&catid=3&manid=181&quantity=1&product=Epiphone+SG+Custom+3+Pick%2Dup%2C+White%2C+New

as i think i read that the middle pickup is always on unles you turn down the control
PRS Starla for sale, see Seconds out section...

PhilKing

Unfortunately the standard Gibson switch is set up for the following:

Bridge
Bridge and Middle (you can also make it neck and middle)
Neck

To wire it differently as you want is impossible with the wafters.  You could get a 4pole mini toggle with on-on-on swtiching and do it then or, since you want the middle on all the time, just wire the neck and bridge to the toggle and have the middle go to a volume pot directly.
So many pickups, so little time

Tricalibur

good idea  :D Ill prob wire directly to the pot like you said
<The Warpigs Are Coming, Hide your Children... and bring BBQ Sauce>