• Welcome to Bare Knuckle Pickups Forum.
 

Help? Top E string sounding "dead"?

Started by Twinfan, December 14, 2006, 09:56:35 PM

Previous topic - Next topic

Twinfan

I've always suspected there was a bit of an issue with my Gordon Smith SG in that the top E string when plucked "open" never really rang out properly and bends seem to choke off on the higher frets.  It had a "general setup" done professionally a while back and I didn't mention the top E issue at that point thinking the setup would cure it.  So the intonation and neck relief etc was all done then.  Tonight I've:

* Fitted a fresh set of strings
* Adjusted the intonation
* Adjusted the overall action
* Lowered the pickup
* Adjusted the pickup pole pieces

It still does it!  It's driving me mad!  I can't see that the string is touching a fret or anything (either open or fretted), and some frets are better/worse than the open string.  All other strings ring out fine and sustain for 25-30+ seconds but the top E sounds dull and only rings out for 15-20 seconds max.

Any ideas as to what might be the problem?  Could it be just be dead wood and it can't be solved?  Would that affect only one string???

gingataff

String guage too light? Dodgy bridge saddle? I'd also suggest it could be the nut but you said you have a problem when bending strings so that can probably be ruled out.
I see a rainbow rising
Look there on the horizon
And I'm coming home

Twinfan

Quote from: gingataffString gauge too light?quote]

I'm using regular 10 to 52s, and all other strings are OK.  I've had it with 11s too, so I'm ruling out a dodgy string.

Quote from: gingataffI'd also suggest it could be the nut but you said you have a problem when bending strings so that can probably be ruled out.

Yeah, fretted notes are a problem too so I'm ruling out the nut.

Quote from: gingataffDodgy bridge saddle?

Could be.  Not sure how this would affect things though?

gingataff

I don't know either :)
But I imagine a string that sits too deeply in a saddle, so that it contacts a lot of the metal, may be transferring a lot of its energy into the saddle and the sound will die quickly.
Likewise, maybe a loose saddle will vibrate and you'll lose energy that way. My physics may be a bit askew though, there's probably a much better explanation.
I see a rainbow rising
Look there on the horizon
And I'm coming home

scottsoldano

You will probably find it's a poorly cut nut. The break angle needs to be correct on the top e otherwise it will really deaden the string.
M ManNailbombH DiverC SweatMulesSinnerM MilksITourTrilogysPainkillers&Crawlers.

Twinfan

Cheers matey - I'll get my local tech to take a look...