• Welcome to Bare Knuckle Pickups Forum.
 

Gibson Flying V- Ceramic Warpig or Alnico Warpig?

Started by Metal-Assmoney, February 27, 2007, 04:15:08 AM

Previous topic - Next topic

evilfrenchy

well if it is your setup(the flying v..),i m guessing you re using an 81 in the bridge(ceramic magnets) position,and a 85 inthe neck position(alnico5magnets),they both have the same output,the only difference is their magnets,so try to swap the pickups (bridge)to hear how they sound respectively,this will give you an idea about the warpigs.then again tim has to lower the output of the ceramic warpig to make it playable(18.5k,instead of 22k),so alnico5 warpig is 22k,ceramic warpig is 18.5k,cheers.

Metal-Assmoney

actually, i hated the 81 in the bridge and i run 2 85s.

but thanx for the advice.