Username:
Password:
BKP Home
Home
Help
Search
Login
Register
Bare Knuckle Pickups Forum
»
Forum Ringside
»
Pickups
»
ALNICO II Mules when tapped?
« previous
next »
Print
Pages: [
1
]
Author
Topic: ALNICO II Mules when tapped? (Read 1790 times)
yZeCounsel
Strawweight
Posts: 3
ALNICO II Mules when tapped?
«
on:
April 05, 2007, 06:52:17 PM »
Okay I did a search specific to this site with these terms
coil tap Mules alnico
HERE
I was not able to glean any information available on how the ALNICO II Mules (NOT THE ALNICO IV) sound when tapped or split.
Anyone try this?
I am trying to decide between the 4 conductor or 2 conductor ALNICO II'S
Logged
Peter Antal
Featherweight
Posts: 438
ALNICO II Mules when tapped?
«
Reply #1 on:
April 05, 2007, 07:47:14 PM »
I'd order 4-conductor and try the split mode. If you don't like it, just wire it in a regular way. You'll only have to desolder the coil tap (I think green and white wire soldered together) from the switch and tape it out of the way.
Logged
rockguitarstar
Flyweight
Posts: 50
ALNICO II Mules when tapped?
«
Reply #2 on:
April 06, 2007, 09:57:04 AM »
I cant tell you on the tapped aspect of the pickups, but I have the mules alnico II's in a PRS singlecut and I couldnt have asked for a better pickup, i would go for it...
Logged
VHII, Rebel Yell set, Mules set with Alnico II neck
Peter Antal
Featherweight
Posts: 438
ALNICO II Mules when tapped?
«
Reply #3 on:
April 06, 2007, 10:27:13 AM »
You can also buy them with Alnico III. It all depends on your guitar and the sound you're after.
Logged
Print
Pages: [
1
]
« previous
next »
Bare Knuckle Pickups Forum
»
Forum Ringside
»
Pickups
»
ALNICO II Mules when tapped?