• Welcome to Bare Knuckle Pickups Forum.
 

Dodgy wiring on my Vee

Started by Ted, June 12, 2007, 03:16:36 PM

Previous topic - Next topic

Ted

Some may recall I had a few issues installing my MM pickups in my Vee.

All is good and once I realised what was causing the thing to short out and the problem was solved.

There is one thing that is slightly bugging me though, but really is not a major issue - i am pretty obsessive sometimes....

When I turn the volume pot to 0 (zero), there the signal is not muted, if I strum the guitar there is a real quite lo-fi twangy sound, with LOADS of hummmmmmmm...

What could be causing this and how can it be rectified. Is it a shielding issue?

Transcend

Quote from: TedSome may recall I had a few issues installing my MM pickups in my Vee.

All is good and once I realised what was causing the thing to short out and the problem was solved.

There is one thing that is slightly bugging me though, but really is not a major issue - i am pretty obsessive sometimes....

When I turn the volume pot to 0 (zero), there the signal is not muted, if I strum the guitar there is a real quite lo-fi twangy sound, with LOADS of hummmmmmmm...

What could be causing this and how can it be rectified. Is it a shielding issue?

dont quote me on this but i believe its the pot isnt of a high enough value so isnt turning off fully.

how is the miracle man neck?

Ted

All pots are 500k. :(

Miracle man neck is ace. I really like it for leads. These pups are basically Zakk Wylde in a tin....so to speak. I love them.

Transcend

Quote from: TedAll pots are 500k. :(

Miracle man neck is ace. I really like it for leads. These pups are basically Zakk Wylde in a tin....so to speak. I love them.

i love my bridge mm once again now but im looking for something to get a necrophagist type lead tone

do you reckon the mm neck is capable#/

Simon D

Does the V have a separate volume control for the neck and bridge pickups, like a Les Paul? If so, I experience exactly the same thing on my Epi LP. This doesn't help much I know, but I haven't found a way to cure it. It could well be a shielding issue, as that is about the one thing I haven't tried.
Warpigs.

HTH AMPS

it's dodgy pots that don't quite read zero ohms when at minimum resistance - get some CTS pots.

:twisted:
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Transcend

Quote from: HEAVIER THAN HELLit's dodgy pots that don't quite read zero ohms when at minimum resistance - get some CTS pots.

:twisted:

so i was a tiny little bit right lol

Ted

Quote from: HEAVIER THAN HELLit's dodgy pots that don't quite read zero ohms when at minimum resistance - get some CTS pots.

:twisted:

I installed CTS pots imported from America. $%&#ers...

Nevermind, I can live with it. I always leave volume on 10 anyway!


Ted

Quote from: Simon DDoes the V have a separate volume control for the neck and bridge pickups, like a Les Paul? If so, I experience exactly the same thing on my Epi LP. This doesn't help much I know, but I haven't found a way to cure it. It could well be a shielding issue, as that is about the one thing I haven't tried.

Yeah I suspect it may be shielding...i'm just too damn tight to take it to a tech... :P