• Welcome to Bare Knuckle Pickups Forum.
 

someone recommend me a DI box

Started by JDC, September 18, 2007, 02:06:02 AM

Previous topic - Next topic

JDC

I need a DI box to go in between my guitar and my soundcard line in for amplitube

I'm after something low noise but not expensive, it's for hi gain metal playing

and what's the difference between passive and active DI boxs (I know the actives needs a power supply, and I think they have a preamp or something, but what this actually does, I ain't got a clue!)

gorath23

I can recommend what NOT to buy - the Palmer PDI-09. Man that sucked for recording. There is a nice thread all about DI boxes on the Andy Sneap recording forum. I think thats located over at www.ultimate-guitar.com or something :S, google it anyway.
[url="//www.myspace.com/cathisord"]www.myspace.com/cathisord[/url] -  Dark Metal.

Brow

Do you need a DI Box or an Audio Interface?

As for DI Boxes, I have a Behringer 2 channel 1 that was about £15-£20 and I've never had a problem with it.
Selling lots of gear, enquire within!......

froglord

Quote from: gorath23I can recommend what NOT to buy - the Palmer PDI-09. Man that sucked for recording. There is a nice thread all about DI boxes on the Andy Sneap recording forum. I think thats located over at www.ultimate-guitar.com or something :S, google it anyway.

I've had fabulous results with the PDI-09, but I'm only using it as a speaker sim, not as a full DI box.

For a good, cheap-ish, metal-friendly DI, I'd go for the Award-Session JD10:

http://award-session.com/jd10.html

Don't be put off by the Jerry Donahue association - this thing has tons of gain on tap, a 3-band eq so you can scoop the mids to taste, and a decent speaker simulator. It can also double as a distortion stompbox if put in front of an amp.
Mules (Eggle Berlin), Piledriver/Yardbird (CV Tele Thinline)
Egnater Tweaker 15

Twinfan

Quote from: froglord
Quote from: gorath23I can recommend what NOT to buy - the Palmer PDI-09. Man that sucked for recording. There is a nice thread all about DI boxes on the Andy Sneap recording forum. I think thats located over at www.ultimate-guitar.com or something :S, google it anyway.

I've had fabulous results with the PDI-09, but I'm only using it as a speaker sim, not as a full DI box.

I've had good results with the PDI-09 too.  What's not to like about it?

JDC

Quote from: gorath23I can recommend what NOT to buy - the Palmer PDI-09. Man that sucked for recording. There is a nice thread all about DI boxes on the Andy Sneap recording forum. I think thats located over at www.ultimate-guitar.com or something :S, google it anyway.

I met the man a month ago :P

talked about amps and stuff

Bob Johnson

Behringer Ultra G - GI 100. You can use it for lots of other applications as well; very flexible.
Regards,
Bob Johnson
Legra Guitars

kevincurtis

Without going overboard on tech speak - passive and active is for impedance matching between the guitar and the mixer (or computer card). If you have active pickups its not an issue, but if you put a passive guitar straight into a desk the sound will be somewhat dulled.

if you want to take a clean sound into the computer and do the sound processing there, you just need a basic DI box. If you want to have a distorted sound going in, then you need something with a speaker simulator - personally Ive recorded with a Palmer, an Award pre-amp, and now a demonizer for getting the amp sound to tape, all worked fine for me, just needed a few different tweaks.

Cheers

JDC

Quote from: Bob JohnsonBehringer Ultra G - GI 100. You can use it for lots of other applications as well; very flexible.

such as? (bet I sound dumb now!)