Author Topic: How to wire single humbucker to push pull tone pot to split (Read 4049 times)

jllozano · « **on:** February 07, 2008, 02:48:04 PM »

As the message subject says, how would one go about splitting the coils on a single humbucker,1 volume and 1 tone guitar....in this case the tone control would be the push-pull....or would the volume pot be better? please advise...the pickup is an alnico warpig,4 conductor.. :?:

Philly Q · « **Reply #1 on:** February 07, 2008, 04:03:42 PM »

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1hum_1vol_1tone_split

But with the BKP colour coding green/white go to the switch part of the push-pull, red to hot and black/bare to ground.

This shows the volume as the push-pull, but it's just as easy to use the tone, it's just a matter of personal preference.

hunter · « **Reply #2 on:** February 07, 2008, 08:31:37 PM »

If you don't use your tone control, you could also wire a normal tone control to be a blender from HB to SC.

Scott674 · « **Reply #3 on:** February 23, 2008, 02:03:05 AM »

Quote from: hunter

If you don't use your tone control, you could also wire a normal tone control to be a blender from HB to SC.

That sounds quite interesting... Have you ever done this? I've heard of bend control for 2 pickups, but not for blending from HB to SC... Do you get some interesting/useful sounds from it?