• Welcome to Bare Knuckle Pickups Forum.
 

Colouring Danish Oil

Started by MrBump, November 24, 2008, 02:09:23 PM

Previous topic - Next topic

MrBump

Guys, is it OK to add dye to Danish Oil, to give a natural finish a bit of a tint?

If so, what's good to use, and in what ratio?  Or is it a sucj it and see sorta thing?

Cheers.

Mark.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

Philly Q

Timely question, I was thinking about something similar!  :D

I'm considering getting an unfinished neck and using Tru-Oil on it, but wasn't sure if it should be stained first then finished over the top, or if you should use tinted Tru-Oil (if such a thing exists).

I also read somewhere that you can spray nitro over a Tru-Oil finish (thinking of the headstock face here).  Is this true, it sounds a bit unlikely somehow...

Sorry for the hijack, but Wez is bound to be along soon!  :wink:
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

WezV

yes and no, you can mix some spirit based stains with the oils but some will not mix and some will affect the drying time of the oil. 

i havnt tried enough to offer a definative answer, so yeah - try it and see

i have heard that you can spray over tru-oil, but havnt tried it yet.  to me it makes more sense to spray the headstock face first before oiling the back
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Philly Q

Quote from: WezV on November 24, 2008, 02:42:56 PM
i have heard that you can spray over tru-oil, but havnt tried it yet.  to me it makes more sense to spray the headstock face first before oiling the back

Yeah, that sounds sensible - presumably that's what Ernie Ball/Music Man do, although they spray the back of the head too.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

MrBump

From the Briwax website:

QuoteNo, Briwax Danish Oil does not come in colours, but you can tint it with Briwax Spirit-based Wood Dye.  The resultant coloured oil does not have a long shelf life, and so it should be mixed and used within a few days.  The disadvantage of mixing the Wood Dyes with Oil is that you are committed to a specific colour.  If you apply the Wood Dye to your wood first, you can add more or different colours until you are happy with the colour, and then seal the colour with Oil afterwards.  If you apply tinted Danish Oil and don't like the finished colour, you will need to sand the finish off before you can re-colour the timber.

Mark.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

tomjackson

Could you not use a tinted Briwax wax over the Danish oil?  I've just waxed a Swamp Ash body over tru-oil, I used the plain wax but had the choice of different tints.  Wax over oil is very nice.

Philly Q

Quote from: tomjackson on November 25, 2008, 01:59:30 PM
Could you not use a tinted Briwax wax over the Danish oil?  I've just waxed a Swamp Ash body over tru-oil, I used the plain wax but had the choice of different tints.  Wax over oil is very nice.

Got any pics Tom?  I'm thinking of putting together a Warmoth Tele and can't decide if I should get finished parts, or save a bit of money, get unfinished and oil/wax them.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

MrBump

Quote from: tomjackson on November 25, 2008, 01:59:30 PM
Could you not use a tinted Briwax wax over the Danish oil?  I've just waxed a Swamp Ash body over tru-oil, I used the plain wax but had the choice of different tints.  Wax over oil is very nice.

I guess.

The thing is, I've got the Danish Oil, and the wax.  The idea was that I could just spend a couple of quid on a dye that I could add to the oil.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

tomjackson

MrBump, I think Touchstone tonewoods do something that you could use.  If that's the way to go I would just add a drop or so to some oil in a cup and build the colour up slowly.   Because you can use so many layers of oil, being so thin you can afford to just add a very small amount of dye and play it safe on the colour.

PhillyQ, there is a picture in this thread here, it's not a very good pic, I'll try to post some more when the guitars finished

http://bareknucklepickups.co.uk/forum/index.php?topic=14816.0