• Welcome to Bare Knuckle Pickups Forum.
 

Mule Bowed inward?

Started by Dubn 57 Goldtop, February 26, 2009, 05:37:07 PM

Previous topic - Next topic

Dubn 57 Goldtop

Hey guys, I was just curious if any of your guys' neck pickups are bowed? It's an uncovered pup, and bows inward. The outsides of the pickup are about a centimeter above pickup rings, so the middle of the pickup (D and G) is level with the plastic, and furthest away from strings.. Shouldn't the pickup be flat and level all the way across? Thanks
Trying to find where I've been...

BigK

I think you will find its the pickup ring that is bent onto an archtop rather than the pickup being bowed. Get yourself a straight edge (i.e a ruler) and double check. if not that is one weird pickup.
PRS Tremonti - PRS Silverburst 594 - Ibanez RG550EX, RG570 & RG721FM - LTD SC 500 -  Schecter 006's - EVH 5150III 50w into custom Zilla Vert 2x12
Previously owned: WP, A & C-Bomb bridge, HD, CS set,

Philly Q

Could you take a picture of it?
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Dubn 57 Goldtop

#3
where's the smacks himself on the forehead smiley? DOH!! Definitely the arched ring. I should probably cut down on the drinking lol. Thanks fellas

EDIT: tho after looking at sharp angles, it does appear to be bowed somewhat lol. and the slug and screw side pieces are not level. class right now, I'll get pictures this evening
Trying to find where I've been...

Twinfan

The bobbins can bow a little bit, I think it happens when the pickups are potted as the heat can bend the plastic.  Nowt to worry about  :)