• Welcome to Bare Knuckle Pickups Forum.
 

Which pots for an Epi LP?

Started by Brow, October 31, 2005, 03:17:01 PM

Previous topic - Next topic

Brow

Hey guys.

What sort of pots do I need to replace those in an Epi LP100? I'm fixing up a guitar for a local school, and am re-wiring the whole thing because it doesn't work :)

I know I need 500k pots, but do I need long or short shaft? Split or solid shaft?

Thanx for any replies.

Craig
Selling lots of gear, enquire within!......

willo

you'll need the long shaft if there is a metal plate in the control cavity, underneath the top of the guitar. If the plate is there, you'll need long shaft, but it varies from guitar to guitar apparently.

Thats all I know  :?
The large print giveth, and the small print taketh away...

Afghan Dave

I'm in the same boat as I need to rewire/upgrade all the pots in my Epi Les Paul Custom.

There is NO METAL PLATE in my control cavity - so I assume that metric short shaft CTS pots would be correct.

I would love some confirmation of this and then I'll get the parts ordered.

I've been burnt buying a short shaft imperial 3 way switch before so I don't want to take chances.  :cry:
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

Ratrod

Yep, it's an Epi so you'll need the short split shaft pots.
BKP user since 2004: early 7K Blackguard 50

Brow

Thanx for the posts guys :) Much appreciated :)
Selling lots of gear, enquire within!......