• Welcome to Bare Knuckle Pickups Forum.
 

mahogany tele HS pickup advice

Started by mitch, June 25, 2010, 07:53:07 AM

Previous topic - Next topic

mitch

hi all!

subject is tele-style guitar with bridge humbucker + neck single

mahogany body
bolt-on maple neck and rosewood fingerboard
25.5" scale

equipment:
h&k puretone or custom made crunch head marshall plexi style + ts + other fx

sound requirements - huge rock sound, not so hi-gain, but punchy and chuggy in bridge + rather clear and twangy in neck position (due to single-channel amplifier, clean sound achieved using volume on neck pickup)

sound for example - band alexisonfire

my choice is:
covered alnico warpig in bridge and covered piledriver in neck

any suggestions?
thank you in advance!

mitch

this is it, guys! :D

once again, any suggestions?

Twinfan

The Warpig will sound FAT if that's what you want?

MrBump

Warpig sounds like a pretty extreme choice, if you ask me...

A good, crunchy low/medium output bridge HB sounds to me like Mule/VHII/Black Dog kinda territory...

Don't fear the "vintage" or "vintage hot" lables; Ace Of Spades sounds AWESOME on my Mules!!!

As for the neck, you could do worse than the Apache. 

Mark.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

mitch

yes, i want really FAT sound, as i enjoy some bass-style rhythm playing on lower strings, tuning is also drop C#

check this rehearsal live demo
http://www.youtube.com/watch?v=7PEy4AyCyDU

i think warpig will do the job =)

FELINEGUITARS

If you want to tighten up the bass you could go ceramic warpig
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!