• Welcome to Bare Knuckle Pickups Forum.
 

Sinner in the neck?

Started by Stevepage, June 27, 2010, 11:48:11 AM

Previous topic - Next topic

Stevepage

I've got a humbucker in the bridge position of my Strat and I've been looking to get something to better match it in the neck. I see Kaz has a Sinner for sale and wondered if the Sinner would work ok in the neck position?

If I remember right, the Sinner Kaz has is rated at 20k. Is that going to be complete over kill? would it sound too bright with 500k pots too?

gwEm

it might be a bit too much (the 20k bridge version) i think. 500k pots are recommended for sinners though
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

HTH AMPS

I'd imagine that a 20k Sinner in the neck would be REALLY pokey, probably like having a Warpig bridge in the neck - thick and overdrives anything in sight.  Probably not the best for cleans.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Prawnik

I assume a 500K volume pot?

'Cause most Strats don't have a tone pot in the bridge.

Prawnik

More along that line:

Does anyone know whether they make a 250K/500K pot on one shaft, so I can hook up the Sinner to the 500K pot and the other single coils to the 250K pot?

Or is there a way to wire up a 250K pot so that it behaves like a 500K pot, but only for the bridge pickup?

DemosKratia

i may just be being an idiot, but i think for that you could wire them up to the 250k pot, and put a 250k resistor between the pickup you want a higher resitance value for and the pot... though im not particuarly educated on these things :P