Username: Password:

Author Topic: Suggestions on a Bridge PU for Mahogany RG  (Read 1835 times)

ant_mcbane

  • Strawweight
  • *
  • Posts: 1
Suggestions on a Bridge PU for Mahogany RG
« on: August 14, 2010, 01:30:54 PM »
Hi, I'm new here so go easy on me xD
I've lurked on here for ages but I've realised it's definitely not a one-size-fits-all type thing, so I thought I would throw my hat in the ring and see if you guys could help me out!
I was just after a recommendation on a bridge pickup for my mahogany body fixed bridge RG, my main tone is the guitar into a modified Boss SD-1 straight into a Mesa Mark 3, running the gain on about 6 with the SD an about 25% drive. I'm after a bridge for this guitar, the stock V8's are absolutely woeful... that being said, nowhere near as bad as the infinity ones. I usually use a JB in these situations, it sounds good... but not great, the highs are shrill and thin and it just doesn't really have a tonal character that I like, I mean I used to be a huge fan but I think I've grown out of it.

Basically I play pretty much anything.. A lot of Hard rock & 80's hair themed stuff a bit, along with a bit of metallica and muse themed stuff in there, I also use my trusty BSIAB to get my Zep & more VH-esque tones, but I usually use my old tele & strat for those tones.

So basically I'm after a good mid-high output bridge humbucker... I've heard that the AlNiCo Nailbomb is excellent but I worry that it could sound a bit muddy and flubby in the low mids in a mahogany guitar with its tonal characteristics.
So I suppose I'm after "THAT" elusive tone, haha.
Thanks in advance guys!

HTH AMPS

  • Middleweight
  • *****
  • Posts: 5649
    • HTH AMPS
Re: Suggestions on a Bridge PU for Mahogany RG
« Reply #1 on: August 14, 2010, 02:08:01 PM »

A lot of Hard rock & 80's hair themed stuff a bit, along with a bit of metallica and muse themed stuff in there


Cold Sweat, no question.

As a coincidence, my mate is selling a set of these as they weren't quite right for him and he's gone back to using Gibson Iommi pickups. 

I however think the CS set is fantastic - I've used them in my Les Paul before and loved them for 80s rock, some spot on Motley Crue tones in there.


Transcend

  • Guest
Re: Suggestions on a Bridge PU for Mahogany RG
« Reply #2 on: August 14, 2010, 06:46:17 PM »
If you want something a bit hotter i have a miracle man in a mahogany RG with a maple top

theres some metallica clips that i made on
www.myspace.com/rentallica

i know that is only one part of your requirements but i thought i would chip in on that note

gepetto33

  • Bantamweight
  • **
  • Posts: 137
Re: Suggestions on a Bridge PU for Mahogany RG
« Reply #3 on: August 14, 2010, 09:49:50 PM »
I had a MM in an all Mahogany guitar, and found it a little scooped sounding.  That's also to consider big strings and lower tuning (Db standard).  In E standard the MM should thicken things up well, but if you'd like a little more mid attack, the Cold Sweat is a bit more balanced in that spectrum.