• Welcome to Bare Knuckle Pickups Forum.
 

ceramic warpigs

Started by hincks, February 24, 2011, 06:42:48 AM

Previous topic - Next topic

hincks

im new to the forum so forgive me if this question has already been asked BUT... it says on the site that an alcino warpig has a d.c. resistance of 21.5 but whats the d.c. resistance on a CERAMIC warpig ?? does anyone know for sure ???

visitorQ

#1
 the DC resistance is the same but the output is higher because of the stronger  field of the ceramic magnet... I guess

Nolly

VisitorQ is correct, but to expand - DC resistance is only related to the wire gauge and number of turns, so changing the magnet will not affect it.

andrew11

Since all BKP are wound by hand every set should vary. I also think they wind them to suit your guitar. I ordered a warpig set with ceramic bridge for my soloist and it came out at 22k with the neck (alnico) at 21.5k.
Warpig set (ceramic bridge)

hincks

ahhh i see. well ok then lets just get to the real question here... whats higher output a ceramic warpig or a wcr ironman ?? thats really what im tryna figure out anyway

ratspeak

Quote from: andrew11 on February 24, 2011, 01:54:37 PM
with the neck (alnico) at 21.5k.

Are you sure? That's the average heat for the bridge WP. The neck averages at 17.4 and I don't think there's that much of a margin for fluctuation in the DC range.