Username: Password:

Author Topic: Short Leg Pups in a les paul?  (Read 9545 times)

James C

  • Featherweight
  • ***
  • Posts: 449
Short Leg Pups in a les paul?
« on: September 20, 2011, 08:44:58 PM »
Just a quick question, If i have some short leg pickups, 50mm spacing, will they fit into a Les Paul okay? I assume that some foam beneath the pickups is all that's needed?

I'm probably going to make a trip to Croydon and get Jon (feline) to fit the pickups but thought i'd double check first.
Formerly "ManOnTheEdge"

Using a Nailbomb 7 Set in Ibanez RG7321

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Short Leg Pups in a les paul?
« Reply #1 on: September 20, 2011, 10:02:18 PM »
Yep, they'll fit fine.  :)

ToneMonkey

  • Welterweight
  • ****
  • Posts: 2230
Re: Short Leg Pups in a les paul?
« Reply #2 on: September 20, 2011, 11:12:24 PM »
John can supply them too  :wink:
Advice worth what you just paid for it.

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Short Leg Pups in a les paul?
« Reply #3 on: September 21, 2011, 01:00:50 AM »
You shouldn't need foam under the pickups - the pickup itself will be sitting in exactly the same position relative to the mounting ring and the pickup cavity.  The only difference is the length of the legs!

I can't see any need to ever use long-leg humbuckers, except maybe on a V or SG with scratchplate-mounted pickups.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

James C

  • Featherweight
  • ***
  • Posts: 449
Re: Short Leg Pups in a les paul?
« Reply #4 on: September 21, 2011, 07:46:18 AM »
thanks for the responses guys, i'll try and get Jon to take a photo so i can post a belated NGD too, getting a Zebra painkiller bridge / Nickel CS neck mounted into my Signature LP

willl go up in a fortnight, i think im looking forward to new pup's like christmas :lol:
Formerly "ManOnTheEdge"

Using a Nailbomb 7 Set in Ibanez RG7321

darkbluemurder

  • Welterweight
  • ****
  • Posts: 2246
Re: Short Leg Pups in a les paul?
« Reply #5 on: September 21, 2011, 08:44:24 AM »
You shouldn't need foam under the pickups - the pickup itself will be sitting in exactly the same position relative to the mounting ring and the pickup cavity.  The only difference is the length of the legs!

+1.

I can't see any need to ever use long-leg humbuckers, except maybe on a V or SG with scratchplate-mounted pickups.

Even then it does not make sense to me. The only situation where it matters is if you want to direct mount the pickups to the guitar body and it has deep holes where the legs are.

When in doubt one can make ordering easy with these options:

- short legs
- 53mm spacing for bridge position
- 4 conductor

Cheers Stephan

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Short Leg Pups in a les paul?
« Reply #6 on: September 21, 2011, 09:49:55 AM »
You need long leg pickups in scratchplate mounted Vs and SGs like Phil says.  You need the pickup to "stick out" from the pickguard quite a long way, hence you need the long legs  ;)

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Short Leg Pups in a les paul?
« Reply #7 on: September 21, 2011, 11:00:19 AM »
You need long leg pickups in scratchplate mounted Vs and SGs like Phil says.  You need the pickup to "stick out" from the pickguard quite a long way, hence you need the long legs  ;)

Yeah, especially for the bridge pickup.  That said, my old Edwards V had a short-leg JB in the bridge position, but they'd used extra-short springs to compensate.  :)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Transcend

  • Guest
Re: Short Leg Pups in a les paul?
« Reply #8 on: September 21, 2011, 05:19:47 PM »
as has already been said some direct mount guitars do too such as my RGD