• Welcome to Bare Knuckle Pickups Forum.
 

bass wiring

Started by 5F6-A, March 28, 2007, 05:58:50 PM

Previous topic - Next topic

5F6-A

I have an old G&L bass.. it has this wiring;
http://www.glguitars.com/schematics/L-1000_schematic_drawing.pdf

I want to get rid of the stock volume, bass cut and treble cut for a std jazz bass configuration ( obviously with an extra pickup ).

I need to identify the hot lead and the ground lead on the schematic after the micro toggle switch ( which I want to keep for its coil tapping capabilities ). Am I right assuming that the white wire is hot and the black one is ground?

Any info will be appreciated.

 :wink:
"I now consider atheism to be brutal because it offers neither consolation nor liberty of any kind" Benjamin Constant in 1804
"Practice until you can hear the metronome grooving" Carol Kaye

PhilKing

Hi Hilario, Yes - the black goes to ground and the white goes to the live end of the volume pot.
So many pickups, so little time

5F6-A

"I now consider atheism to be brutal because it offers neither consolation nor liberty of any kind" Benjamin Constant in 1804
"Practice until you can hear the metronome grooving" Carol Kaye

5F6-A

Basically this is how it's going to be wired;



The big grey squeare is a humbucker and the smaller one is a single coil. The mini toggle switch controls the humbucker for humbucer/singlecoil or singlecoil through cap operation. The 3 pots. The one on the left controls the humbucker the one in the middle controls the volume for the singlecoil and finally the one on the right is a master tone.

Green lines are ground.
"I now consider atheism to be brutal because it offers neither consolation nor liberty of any kind" Benjamin Constant in 1804
"Practice until you can hear the metronome grooving" Carol Kaye