Aftermaths-3waytelestyle. Need your opinion

[dead_scott]

Hello, forum users, I'm new here and I'm a new Bareknuckle owner. So, I have this 2003 RG 1527 without any electronics whatsoever. My new set of aftermaths arrived about 2 weeks ago. I bought the pots, wire, ground wire, jack and a 3way Dimarzio telecaster-style switch. Now, I would only like to use the pick-ups alone--neck or bridge (series, I think), or together and I found this diagram and the color code. I would like to know if they will work for me. Thanks a lot!



P.S. I'm not doing the installation myself (I've never soldered anything in my life), but I am researching as far as I can so that I give the luthier every information that he might need (it's their job, but sometimes they do the same thing with every guitar)

[Toe-Knee]

The info that comes with the pickups will be sufficient for what you want.

[Attica!]

I actually had a good look through the support section on the website, and I'm really surprised there isn't an HH, 1 Vol, 1 Tone, 3-Way diagram. The closest I can find id the one with the push/pull Tone. Of course it's easy to figure out by looking at other diagrams, but I think the diagram your wanting would have been a good, if not important, addition to the diagram section

[Philly Q]

The diagrams you've got should be more than enough.

Alternatively, this BKP diagram pretty much shows the right wiring - just substitute another humbucker for the Tele bridge pickup, and 500k pots instead of 250k.

https://bareknucklepickups.co.uk/main/downloads/schematics/general/teles/1_tele_bridge__1_hum_neck__1_vol__1_tone__3_way.pdf

[dead_scott]

THanks a lot! I also mailed the technical support :lol: So I'll give it a go and I'll post some pics and sounds as soon as I can!