• Welcome to Bare Knuckle Pickups Forum.
 

Pulling out old tubes

Started by Bird, March 27, 2006, 09:57:24 PM

Previous topic - Next topic

Bird

How long should the amp be without power before pulling the old tubes? I've heard you can get a jolt if you don't let it sit for a bit  :?
"Jazz isn't dead, it just smells funny." Frank Zappa

Searcher

Quote from: BirdHow long should the amp be without power before pulling the old tubes? I've heard you can get a jolt if you don't let it sit for a bit  :?

Really? From the tubes themselves? Never heard of that.  I know you can seriously fry yourself by touching other areas though.
Quote from: Sifu BenAaagh! Help!!! The GAS!!! The GAS!!!!!!!!!!!!

Bird

I've heard of it but I'm not sure of the technical reasons behind it.
"Jazz isn't dead, it just smells funny." Frank Zappa

HJM

You'll burn yourself first - actually you can get a jolt, if you manage to get close to the pins when you pull the tube it you may get a flash of HT!

The old trick of leaving standby ON and turn the power off  leaving a chord hanging on the guitar. Can help discharge dangerous voltages quickly. It drains the charge in the filter caps.

I usually learn the hard way on things like this.......if it's an old amp watch the top of the filter capacitors.....the old ones weren't always insulated (got shocked twice on an old Orange, first time I thought 'what was that? so touched it again....dumb!)
Apache,VHII,Emerald,Nailbomb,MiracleMan,StormyMonday,BlackDog,Trilogy,Mothersmilk,Sultans+Sinner

donovan.x

Obviously not greatly hilarious to you, but I haven't laughed that hard since"Something about mary".  :lol:  :lol:  :lol:
DEATH TO ALL BUT METAL!

Bird

Thanks :)  It's been off for about 4 or 5 hours, I'll be careful not to touch anything but the tubes while I'm back there.
"Jazz isn't dead, it just smells funny." Frank Zappa