• Welcome to Bare Knuckle Pickups Forum.
 

Amp vol issue and one valve running REALLY hot/bright!!!!???

Started by Twinfan, December 31, 2006, 12:04:44 AM

Previous topic - Next topic

Fourth Feline

Good idea to keep an eye on the repairer, however reputable they might be. They may think "replace with a lesser specification transformer rather than have a re-wind on the Partridge, just to repair it quicker and therefore 'please' you"...

The P.M. ( we may as wll do it here )

was about just what string types/gauges and picks you use. As a fellow S.G. user, but with a different playing style/tone, it's Stormy Monday's and D'addario 10-52 with a BKP 1.21 celluloid pick.

I therefore curious what works for you and your Riff-Raffs/playing style.

In guitar magazine interviews, Angus seems to be using EB 9-42 and a heavy pick, but on guitargeek.com they say he uses 10-48 !  

FF.

Twinfan

My Angus setup is:

Epiphone '65 reissue SG with Maestro Vibrola (Korean custom shop limited edition) fitted with:

o   Riff Raffs
o   CTS 500k audio taper potentiometers
o   Switchcraft jack and selector switch
o   Hovland MusiCap capacitors
o   TonePros bridge
o   Tusq nut
o   Dial pointers

I use 1.14mm Jim Dunlop Ultex Standard plectrums and Ernie Ball Regular Slinky strings (10-46).

At our last gig, a punter told me I had Riff Raff nailed (both playing and tone-wise) so I guess I've got it right!

I believe Angus uses both 9 and 10 gauge strings for recording - 10's with a 48 low E for rhythm and 9s for solos.  Live, it's 10s if his hands are not too knackered (he has tiny hands!) otherwise it's 9s.

I find 9s on a 24.75" scale length too sloppy, so I stick with 10s for a bit of "fight".  Works for me, and you get a fuller tone.  Combined with the Klipp my sound has a bit more ooomph than Angus', but no regular punter would know any different.  Some of the guitar players can't believe I'm using a "cr@ppy old Laney" though...   :lol:

Twinfan

An update on my faulty Klipp:

Just had a call from my music shop and the amp will cost £90 to fix.  The repairers hadn't said exactly what the problem was but I'll find that out when I get the receipt for the work.  At that price nothing major can have gone wrong so it must just need the odd minor component and a service.  Phew!!!!

I'll update this thread with the parts repaired/replaced after I pick the amp up.

And relax........

Fourth Feline

Hi Twinfan,

May I be the first to congratulate you on the good news ! I look forward to hearing what the exact cause was, so I can go back and relate it to the circuit diagram you kindly posted.

* OFF TOPIC*

Thanks for the Angus Young info by the way, I also went for the CTS 500k pots instead of the stock Gibson 300K ones. The only difference being that I had to go for linear taper volume controls to match the sweep of the old ones (as per a previous thread). I fitted Sprague orange drop caps, as I had not heard of the Hoyland at the time. I am convinced they do make a difference though, as I replaced them before the pots or pickups and heard a silky sweet clarity not there before.


FF.

Twinfan

Cheers FF - I'll let you know what the amp issue was.

Re. the Angus stuff, I used Sprague Orange drop caps before the Hovlands and they were good value.  Nice and clear and a decent price.  The Hovlands are more expensive and just have that bit more musical edge to them.  There's not a lot of difference though to my ears, to others it may be much more.

For the pots I've been very happy with the audio taper volumes.  I roll down to about 7ish for rhythm playing and up to 10 for solos.  Works for me!

Twinfan

Just picked my Klipp up from being repaired.  £89 - not bad at all.

The problem was a faulty valve base socket that was repaired, plus the amp was given a general service check too.

Thought some of you (FF mainly) might be interested in the result!

Fourth Feline

Thanks for the information Twinfan, please ignore my private message about the same subject.

Good deals all round eh ?  :D  :D  :D

FF.

HTH AMPS

Quote from: TwinfanJust picked my Klipp up from being repaired.  £89 - not bad at all.

The problem was a faulty valve base socket that was repaired, plus the amp was given a general service check too.

Thought some of you (FF mainly) might be interested in the result!

£89 to replace a valve base and a general service - I've got to put my prices up.

I've just modded a Marshall Bluesbreaker that required removing the PCB from the amp.  also included a pair of 6L6s in the deal and a general service.  total cost... £70

Getting repair bills like that is why I taught myself about valve amps - ripoff techs boil my piss  :x

:twisted:
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

Twinfan

Well my local shop will take a cut as the middle man, so I guess the repair itself was £80ish?  Saved me a trip to Liverpool anyway!

Ratrod

BKP user since 2004: early 7K Blackguard 50