• Welcome to Bare Knuckle Pickups Forum.
 

tip for owners of gibson faded guitars

Started by gwEm, May 11, 2007, 10:48:33 AM

Previous topic - Next topic

gwEm

http://www.gibson.com/relations/forum/index.asp?sub=show&action=posts&fid=3&tid=94888

inspired by this link, i went to halfords and brought some t-cut scratch remover (the normal kind, not the rapid action).

applied it to the whole guitar and it made a *massive* difference. actually looks very close to a real cherry finish now, and with chrome riff raffs, witch hat knobs and pointers it looks almost like a '75. well, the closest i'll ever get anyway.

patience is the key - using a very small amount of the scratch remover at a time. spend some hours on it. you can do it fast, but the polish sticks in the grain of the wood, and its hard to remove - as i learnt to my cost.
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Philly Q

I've thought about doing that to my Pete Townshend SG, but decided to just let it "polish itself" with use.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

WezV

T-cut can be removed from the grain with water and a soft brush - takes patience and can be frustrating on guitars with deep grain but eventually it will come out.
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

gwEm

WezV: what an excellent tip! i'm pleased i posted :)
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly