• Welcome to Bare Knuckle Pickups Forum.
 

Switchcraft vs Epi switch

Started by jimi hendrix, September 19, 2007, 09:05:44 PM

Previous topic - Next topic

jimi hendrix

Hi guy's,  my pickup selector switch has started playing up on my Epi Les Paul Std, (thought it was doing well!), I was thinking about getting a Switchcraft type if possible, they look more substantial than standard Epi, but I seem to remember the depth of thread was either too long or too short, anyone had any experience fitting these? :?

Ted

Normal LP Switchcraft will do.

They have shorter ones too, but you want the slighly longer one.

gwEm

you can always add a few washers to get it to the right height
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Jonesy76

No worries on the Switchcraft switch at all.  Should be the first thing that all Epi owners do.

Do yourself a favour though whilst you have the back off and the soldering iron out.......change your pots over to CTS 500K ones, and replace your wiring with braided wires.  If you want to go really extravagant find a pair of Bumblebee caps too, and watch as your Epi suddenly discovers a whole new tone!  My old Epi with Gibson 57 Classics and a full Historic quality wiring loom blew the socks off my Gibson factory Standard.
Make it idiot proof and someone will make a better idiot!

Stormy Mondays, Mules, and Riff Raffs

WezV

Quote from: Jonesy76No worries on the Switchcraft switch at all.  Should be the first thing that all Epi owners do.

Do yourself a favour though whilst you have the back off and the soldering iron out.......change your pots over to CTS 500K ones, and replace your wiring with braided wires.

completely agree, an epi lp was my second ever guitar and the switch died within 6 months!!

Switchcrafts are so simple and sturdy they usually last forever!!
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

jimi hendrix

Cheers guys, I've been going to swap it for a while, but it's given me an excuse to do it now. I'm going to do the lot while I am at it, switch, pots, jack socket, caps and wiring.

Jonesy76

If you want the proper Bumblebee paper and oil capacitors Julian who runs www.fake58.co.uk normally has them in stock.  £25 for a pair is pricey compared to 80p each for Sprague orange drops, but if you're not playing at ceiling bursting overdrive levels you'll be able to hear the difference.  The Bumblebees give so much extra warmth to your tone.

You can get the rest of your bits from there too if needs be.......just need a nice pair of Bareknuckles to attach it all to :wink:
Make it idiot proof and someone will make a better idiot!

Stormy Mondays, Mules, and Riff Raffs