Username: Password:

Author Topic: NGD! Less Paul!  (Read 2680 times)

Pierre

  • Featherweight
  • ***
  • Posts: 480
NGD! Less Paul!
« on: January 13, 2009, 05:58:19 PM »




She's an Edwards... er... something. Anyway... Had a JB/59 set, I replaced the JB by a Jazz after test riding her. The JB was screechy, yuck. Jazz is much better in the bridge.
Oiled the board, cleaned her up all around.
Strung her up with 11s (were 09s on it before), raised the strings a bit. I need to straighten the neck but I don't know yet the correct truss rod wrench size :(
She also needs new knobs... what would you guys advise and where in the UK?

Thanks for watching this! She loves y'all :D

Will

  • Welterweight
  • ****
  • Posts: 2599
Re: NGD! Less Paul!
« Reply #1 on: January 13, 2009, 05:59:35 PM »
I like white LP's. That looks like more of a More Paul though  ;)

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: NGD! Less Paul!
« Reply #2 on: January 13, 2009, 06:34:01 PM »
That looks like more of a More Paul though  ;)

Well, Less is More! (less money for the guitar - more money in pierre's pocket!)
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Scotty477

  • Lightweight
  • ***
  • Posts: 750
Re: NGD! Less Paul!
« Reply #3 on: January 13, 2009, 06:42:38 PM »

Looking good there  :D

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: NGD! Less Paul!
« Reply #4 on: January 13, 2009, 07:55:25 PM »
nice!... although i was a bit thrown out by your thread title as today i got this back from the sprayers:



viking

  • Lightweight
  • ***
  • Posts: 509
Re: NGD! Less Paul!
« Reply #5 on: January 13, 2009, 08:26:19 PM »
Very nice guitar,Pierre!Congrats  8)!Edwards LP's are very good.I wouldn't change the knobs.I like those ones..I couldn't help you about the trussrod wrench size but if you're looking for a good guitar-tech you'll have to specify your area in GB.

Pierre

  • Featherweight
  • ***
  • Posts: 480
Re: NGD! Less Paul!
« Reply #6 on: January 13, 2009, 08:56:00 PM »
Oh I'm a guitar tech myself and I know all of the ones in Edi, no worries. Thanks!

hunter

  • Middleweight
  • *****
  • Posts: 5262
    • http://www.myspace.com/christophjaeger
Re: NGD! Less Paul!
« Reply #7 on: January 13, 2009, 08:57:23 PM »
My Edwards truss rod is 5/16 inch
Tweaker's Paradise - Player's nightmare.

dave_mc

  • Middleweight
  • *****
  • Posts: 9796
Re: NGD! Less Paul!
« Reply #8 on: January 13, 2009, 08:58:19 PM »
edwards are very nice guitars. good value too, till the pound collapsed against the yen, anyway... :)

Lew

  • Guest
Re: NGD! Less Paul!
« Reply #9 on: January 13, 2009, 09:03:09 PM »
nice!... although i was a bit thrown out by your thread title as today i got this back from the sprayers:





HA!!Awesome ;-D

FernandoDuarte

  • Welterweight
  • ****
  • Posts: 3978
Re: NGD! Less Paul!
« Reply #10 on: January 13, 2009, 09:06:40 PM »
That Jr looks very nice! Wich pickup model?

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: NGD! Less Paul!
« Reply #11 on: January 13, 2009, 09:36:43 PM »
BKP-91 into a proper 62 gibson (would be the SG shape at that year i think) wiring loom

Will

  • Welterweight
  • ****
  • Posts: 2599
Re: NGD! Less Paul!
« Reply #12 on: January 13, 2009, 09:45:36 PM »
Is that a commission, Wez, or experiment?

WezV

  • Middleweight
  • *****
  • Posts: 5838
    • http://wezvenables.co.uk
Re: NGD! Less Paul!
« Reply #13 on: January 13, 2009, 09:52:15 PM »
commission.. really its pretty standard stuff so not experimenting with owt like i usually would, although the new sprayer has gone to great lengths to get the 55 junior finish looking proper - front and back.  although i might do some a/bing of all the different wraparounds i have here at the moment if i can be bothered to keep restringing it

sorry, didnt mean to derail the thread.... just got destracted by the title... i will do a proper thread for mine once its finished

Pierre

  • Featherweight
  • ***
  • Posts: 480
Re: NGD! Less Paul!
« Reply #14 on: January 24, 2009, 12:55:42 PM »
DONE! I'll see if I can get pictures that aren't taken with my phone.

Black Gotoh bridge + tailpiece and associated screws/studs
Bareknuckle Riff Raff in the bridge, SD 59n in the neck
Treble bleed caps, new tone caps, and I rewired it to my favorite LP style wiring
Black speed knobs
Nut has been shimmed
Strings (10/52s) are about 4mm from the 12th fret on low E, 3mm on the high E, a tiny bit lower than what I'm used to maybe but it does feel very nice!
Only thing missing: Black switch tip

And MAYBE someday a set of black, modern style tuners, we'll see.