Celestion solder only tag panels?

[TomW]

I've just bought 2 celestion heritage g12h30 speakers, and all previous speakers I have installed have just had the normal tags that you can slot on. But these have solder only tag panels. How exactly do you wire them up? Is it just a case of slotting the wires onto the tags of the speaker and then soldering that, or do I need to use a different type of wire without tags on the end?

Cheers for any help

[hamfist]

I've just bought 2 celestion heritage g12h30 speakers, and all previous speakers I have installed have just had the normal tags that you can slot on. But these have solder only tag panels. How exactly do you wire them up? Is it just a case of slotting the wires onto the tags of the speaker and then soldering that, or do I need to use a different type of wire without tags on the end?

Cheers for any help

Same wire. Just remove the tags, strip off a little bit of insulation and solder to the appropriate tag on the speaker !

Its just a connection for electricity. You can connect two things in many different ways. Personally I prefer soldering to push-fit connectors on speakers.

[TomW]

Ahh ok, Cheers for the fast reply. I'll get installing them now then  :D

[bobthemerciful]

I never trust spade (push-on) terminals on speakers. I always solder em. A tranny amp may be able to cope with the impedance change if one of em comes off mid-gig, but not many valve amps would like it at all.

[Catalyst77]

I had the same problem a few months ago, i just cut then ends of as recommended and soldered them on directly.  In fact i also bought the same speakers!

Wasnt from some guy on ebay was it?

[TomW]

Nah I got mine from lean-business. I decided to solder them all in the end aswell cos when I opened it up some of the tags we're close to falling off by themselves. Thanks for the help guys.

[HTH AMPS]

while you're at it, replace the speaker wire with something beefier - you will notice an improvement in the tone (not massive, but certainly noticeable imo).  I just use the Van Damme speaker cable from Maplins, it's nice stuff and only around £1.50/metre