Username: Password:
« previous next »
Pages: [1]

Author Topic: Mule Bowed inward?  (Read 897 times)

Dubn 57 Goldtop

  • Flyweight
  • *
  • Posts: 55
Mule Bowed inward?
« on: February 26, 2009, 05:37:07 PM »
Hey guys, I was just curious if any of your guys' neck pickups are bowed? It's an uncovered pup, and bows inward. The outsides of the pickup are about a centimeter above pickup rings, so the middle of the pickup (D and G) is level with the plastic, and furthest away from strings.. Shouldn't the pickup be flat and level all the way across? Thanks
« Last Edit: February 26, 2009, 08:32:15 PM by Dubn 57 Goldtop »
Logged
Trying to find where I've been...

BigK

  • Featherweight
  • ***
  • Posts: 423
  • BKP's: C-Pig, MM, CS set, Monster MM, NailBomb
Re: Mule Bowed inward?
« Reply #1 on: February 26, 2009, 09:10:07 PM »
I think you will find its the pickup ring that is bent onto an archtop rather than the pickup being bowed. Get yourself a straight edge (i.e a ruler) and double check. if not that is one weird pickup.
Logged
PRS Tremonti - PRS Silverburst 594 - Ibanez RG550EX, RG570 & RG721FM - LTD SC 500 -  Schecter 006’s - EVH 5150III 50w into custom Zilla Vert 2x12
Previously owned: WP, A & C-Bomb bridge, HD, CS set,

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: Mule Bowed inward?
« Reply #2 on: February 26, 2009, 09:15:48 PM »
Could you take a picture of it?
Logged
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Dubn 57 Goldtop

  • Flyweight
  • *
  • Posts: 55
Re: Mule Bowed inward?
« Reply #3 on: February 27, 2009, 12:59:40 AM »
where's the smacks himself on the forehead smiley? DOH!! Definitely the arched ring. I should probably cut down on the drinking lol. Thanks fellas

EDIT: tho after looking at sharp angles, it does appear to be bowed somewhat lol. and the slug and screw side pieces are not level. class right now, I'll get pictures this evening
« Last Edit: February 27, 2009, 01:03:09 AM by Dubn 57 Goldtop »
Logged
Trying to find where I've been...

Twinfan

  • Light Heavyweight
  • ******
  • Posts: 10528
Re: Mule Bowed inward?
« Reply #4 on: February 27, 2009, 08:35:29 AM »
The bobbins can bow a little bit, I think it happens when the pickups are potted as the heat can bend the plastic.  Nowt to worry about  :)
Logged
Pages: [1]
« previous next »