Author Topic: Sg truss rod tool (Read 3526 times)

sgmypod · « **on:** March 23, 2009, 03:25:51 PM »

Damn sg has a nut for the truss rod..where do you buy a tool from for these

Twinfan · « **Reply #1 on:** March 23, 2009, 03:27:34 PM »

Simple socket set should do it?

Or try WD Music....

Fikealox · « **Reply #2 on:** March 23, 2009, 11:00:04 PM »

Coincidentally, I was just adjusting my SG's truss rod. An 8mm socket on an extension bar should do the trick, dude.

Fourth Feline · « **Reply #3 on:** March 25, 2009, 11:29:57 AM »

Coincidentally, I was just adjusting my SG's truss rod. An 8mm socket on an extension bar should do the trick, dude.

As Twinfan and Fikealox said, I just use an 8mm box key / socket . :)

FELINEGUITARS · « **Reply #4 on:** March 29, 2009, 03:55:00 PM »

5/16" would be better/ideal

Fourth Feline · « **Reply #5 on:** March 31, 2009, 11:48:40 AM »

5/16" would be better/ideal

Thanks for the clarification Jonathan ; I will look out for a 5/16" head for my 'snap on' driver now . :)

sgmypod · « **Reply #6 on:** March 31, 2009, 03:09:18 PM »

yes thanks for that will go buy one for 'old un'