Username: Password:

Author Topic: Technical Question About Down Tuning  (Read 4031 times)

SRChrono

  • Junior Flyweight
  • *
  • Posts: 34
Technical Question About Down Tuning
« on: May 23, 2009, 12:52:11 AM »
Hey,

I want to tune my guitar to C#, F#, B, E, G#, C#. Which I believe is drop C. I'm just wondering if I would need a neck adjustment after I did it or is it ok to tune your guitar back in forth from drop tunings to standard. Will it screw up the neck at all or anything?

Thanks

Fikealox

  • Featherweight
  • ***
  • Posts: 444
Re: Technical Question About Down Tuning
« Reply #1 on: May 23, 2009, 02:12:47 AM »
That's C# standard, if I'm not mistaken (drop C is C, G, C, F, A, D). To answer your question, though: You can safely try it, but you'll probably need a setup to get satisfactory action.
BKPs (soon): CS, TS.
Ex-BKPs: Abrax, NB, SM, PK, Mule, WP.

hunter

  • Middleweight
  • *****
  • Posts: 5262
    • http://www.myspace.com/christophjaeger
Re: Technical Question About Down Tuning
« Reply #2 on: May 23, 2009, 06:21:06 AM »
What is your current tuning and string gauge?

If you up the string gauge in the right proportion, setup work can be kept to a minimum. However, you might have to have the nut slots widened to avoid tuning issues.
Tweaker's Paradise - Player's nightmare.

SRChrono

  • Junior Flyweight
  • *
  • Posts: 34
Re: Technical Question About Down Tuning
« Reply #3 on: May 23, 2009, 07:58:31 AM »
I'm tuned to standard with 11s - 46 on the guitar.

pagan7

  • Bantamweight
  • **
  • Posts: 184
Re: Technical Question About Down Tuning
« Reply #4 on: May 23, 2009, 10:49:09 PM »
You may also need to tweak the intonations for an "in tune" drop tuning all the way up the neck
CERAMIC NAILBOMBS + Ibanez RGT42DX and PAINKILLERS + Ibanez RG321MH and A5 NAILBOMBS + Ibanez RG1550

FELINEGUITARS

  • Middleweight
  • *****
  • Posts: 6609
  • London & Southeast's Number 1 BKP stockist
    • http://www.felineguitars.com
Re: Technical Question About Down Tuning
« Reply #5 on: May 24, 2009, 12:48:20 AM »
You WILL need bigger strings 11-54 minimum I would say
You will need a nut adjustment , and an intonation adjustment
You may need a truss rod adjustment too
www.felineguitars.com - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

syr2012

  • Featherweight
  • ***
  • Posts: 274
Re: Technical Question About Down Tuning
« Reply #6 on: May 24, 2009, 03:02:34 AM »
You might be fine if you only do it once in a while and not for long. But if you plan on doing some serious playing, you're gonna need to have all that feline mentioned adjusted. I used to do Db every now and then, but never seriously enough to mandate adjustment.
BKP Team: Bridge MQ, Black. Bridge HD, Raw Nickel.
To Do: Bridge Nailbomb in chrome (?)

SRChrono

  • Junior Flyweight
  • *
  • Posts: 34
Re: Technical Question About Down Tuning
« Reply #7 on: May 24, 2009, 06:18:21 AM »
Thanks a lot for the replys guys! I'll consider the change on one of my guitars :D