Username: Password:

Author Topic: Humbucker for basswood bolt -on  (Read 1696 times)

lamp

  • Bantamweight
  • **
  • Posts: 228
Humbucker for basswood bolt -on
« on: December 02, 2009, 05:33:01 PM »
I've got a Fender Jag-stang, which despite its ability to polarise opinion, I love.
About a year ago I asked Tim for his opinion on what I should choose to replace the Seymour Duncan SH-5 I have in there at the moment.  Given style of music I'm after (modern rock/metal eg. Fightstar/Funeral for a Friend) he suggested a Nailbomb.
Since then I have not played it much and been using my Les Pauls almost exclusively (one has Rebel Yell set in it and the other a Nailbomb/MQ combo). 
I'd like to still upgrade the Jag-stang.  It's a big slab of basswood and quite a bassy/woolly guitar.  I love the Nailbomb in my LP, and that's definitely the kind of ballpark I'm after. 
However, I'd like something a bit different...a bit tighter than the Nailbomb, but not really full on metal territory. 
What do you guys suggest before I mail Tim?
Thanks.
TS set - RY neck - ABomb bridge x2 - MQ neck - MMan bridge - MMilk neck - Sinner bridge - PDriver bridge - 10th Anniversary set - VHII bridge

gingataff

  • Welterweight
  • ****
  • Posts: 1872
  • NBVHIIMMPKAHITTSSH
    • My YouTube Channel
Re: Humbucker for basswood bolt -on
« Reply #1 on: December 03, 2009, 03:45:18 AM »
Perhaps a Rebel Yell or Cold Sweat could be an option.
I see a rainbow rising
Look there on the horizon
And I'm coming home

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: Humbucker for basswood bolt -on
« Reply #2 on: December 03, 2009, 02:42:36 PM »
I agree with gingataff on the Rebel Yell. Although the Cold Sweat is a bright pickup, I've had an experience where it accentuated the wolly bottom end of a particular guitar.

The Rebel Yell was based on the Nailbomb apparently, it has less bass and is more hard rock than metal.
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

lamp

  • Bantamweight
  • **
  • Posts: 228
Re: Humbucker for basswood bolt -on
« Reply #3 on: December 03, 2009, 02:46:09 PM »
Thanks guys that's great.

And if I wanted something with a bit more poke to it what would you suggest?  MM?
« Last Edit: December 03, 2009, 03:41:04 PM by lamp »
TS set - RY neck - ABomb bridge x2 - MQ neck - MMan bridge - MMilk neck - Sinner bridge - PDriver bridge - 10th Anniversary set - VHII bridge

lamp

  • Bantamweight
  • **
  • Posts: 228
Re: Humbucker for basswood bolt -on
« Reply #4 on: December 03, 2009, 04:23:41 PM »
Hmm....have had a listen to some MM clips and it does sound good in basswood...
TS set - RY neck - ABomb bridge x2 - MQ neck - MMan bridge - MMilk neck - Sinner bridge - PDriver bridge - 10th Anniversary set - VHII bridge

gwEm

  • Middleweight
  • *****
  • Posts: 7456
    • http://www.preromanbritain.com/gwem
Re: Humbucker for basswood bolt -on
« Reply #5 on: December 04, 2009, 01:27:03 AM »
Hmm....have had a listen to some MM clips and it does sound good in basswood...

its probably tight enough to handle the jagstang scale length too
Quote from: AndyR
you wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

lamp

  • Bantamweight
  • **
  • Posts: 228
Re: Humbucker for basswood bolt -on
« Reply #6 on: December 04, 2009, 09:28:38 AM »
Thanks again.  Leaning towards the MM at the moment.
TS set - RY neck - ABomb bridge x2 - MQ neck - MMan bridge - MMilk neck - Sinner bridge - PDriver bridge - 10th Anniversary set - VHII bridge

lamp

  • Bantamweight
  • **
  • Posts: 228
Re: Humbucker for basswood bolt -on
« Reply #7 on: February 16, 2010, 10:36:44 PM »
Digging this one up as I need a last piece of advice. 
My birthday is coming up and so I will be ordering a pickup for this guitar in the next couple of weeks.
Last question is, how do the Miracle Man and C-Bomb compare?  Is the C-Bomb just an overwound Cold Sweat? 
And what are the cleans like?
TS set - RY neck - ABomb bridge x2 - MQ neck - MMan bridge - MMilk neck - Sinner bridge - PDriver bridge - 10th Anniversary set - VHII bridge