• Welcome to Bare Knuckle Pickups Forum.
 

Burp! Pardon me, it's just a little GAS.......

Started by Twinfan, November 07, 2010, 01:04:55 PM

Previous topic - Next topic

Philly Q

Quote from: Twinfan on November 08, 2010, 12:31:54 PM
It wasn't like that at all Phil - I'm no scheming bar-steward!

Just kidding Dave!  PDT_002
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Twinfan

Thanks Andy  :)

I've always liked the gainier side of things and have usually used the amp for rhythm gain and a pedal in front.  Since getting the Bogner XTC I much prefer the 'all amp' tone, so I'm sticking with that as it suits me better.  I also like hotter pickups that PAFs too  :o

It's the 80s hair-rocker in me coming out to play.  Poison/Quireboys/Bon Jovi/Guns N Roses anyone???

Philly Q

Quote from: Twinfan on November 08, 2010, 12:51:23 PM
Poison/Quireboys/Bon Jovi/Guns N Roses anyone???

Not for me, ta, but I'll have a bit of Winger/Dokken/Enuff Z'Nuff/Saigon Kick/Tesla.  :)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

dave_mc

#33
^ I'll have it all :lol:

Quote from: Twinfan on November 07, 2010, 04:44:54 PM
CHeers Dave - our bass player is an IT and web subculture geek!  :lol:

yeah I'm not sure how I heard the phrase first. I think I was messing about on wikipedia and came across it :lol: I remember thinking it'd make a good band name :D

Dazza1004

I don't know a lot about amp construction etc but I have a question about the Marshall,

I have read the tubes are mounted directly to the PCB and this is not really ideal, coupled with Marshall's sometimes questionable build quality, do you have any concerns about the reliability of the amp ?

ignore me if I am talking shitee

Twinfan

To be honest, I don't care how it's built if it sounds good!  :lol:

It'll have 12 months warranty and can always be sent back to Marshall after that to be fixed, they're bound to have spare parts.

FELINEGUITARS

Quote from: Philly Q on November 08, 2010, 01:00:36 PM
Quote from: Twinfan on November 08, 2010, 12:51:23 PM
Poison/Quireboys/Bon Jovi/Guns N Roses anyone???

Not for me, ta, but I'll have a bit of Winger/Dokken/Enuff Z'Nuff/Saigon Kick/Tesla.  :)

Dokken, Motley Crue, Ratt, Black N Blue, Great White, Winger, Warrant, Teeze, Tesla , Bon Jovi (first 3LPs)
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

Matt77

^ That's a quality list of mildly off topic 80s rock  :D
Always welcome in any thread

Philly Q

Quote from: FELINEGUITARS on November 08, 2010, 11:19:32 PM
Quote from: Philly Q on November 08, 2010, 01:00:36 PM
Quote from: Twinfan on November 08, 2010, 12:51:23 PM
Poison/Quireboys/Bon Jovi/Guns N Roses anyone???

Not for me, ta, but I'll have a bit of Winger/Dokken/Enuff Z'Nuff/Saigon Kick/Tesla.  :)

Dokken, Motley Crue, Ratt, Black N Blue, Great White, Winger, Warrant, Teeze, Tesla , Bon Jovi (first 3LPs)

Oh, and

BADLANDS!!!!
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

jpfamps

Quote from: Dazza1004 on November 08, 2010, 09:25:23 PM
I don't know a lot about amp construction etc but I have a question about the Marshall,

I have read the tubes are mounted directly to the PCB and this is not really ideal, coupled with Marshall's sometimes questionable build quality, do you have any concerns about the reliability of the amp ?


Most amps these days have valves mounted on the PCB.

To use chassis mounted valves sockets requires that they are wired by hand, which will significantly increases the production cost of the amp (assuming you can find enough people with the requiste skills to hand wire the sockets).

The 2 main issues with PCB mounted sockets are broken solder joints due to mechanical disturbance when valves are replaced, and collateral damge to the PCB if a power valve shorts.

Power valve shorts in this amp should be eliminated by the active bias/ power supply management in this amp.

Although some of Marshall's recent products haven't been that well executed to say the least, they have an excellent service department and give very good technical support.

[url="//www.jpfamps.com"]www.jpfamps.com[/url]

Twinfan

Just a quick update on my AFD100. No delivery as yet, fingers crossed it'll turn up at Sounds Great before the New Year.

I see Guitarist have reviewed one and given it the full 5 stars for everything and the Gold Award. I would imagine any remaining amps will now get snapped up fairly quickly......