Username: Password:

Author Topic: 2006 SG TOM replacement  (Read 2730 times)


  • Guest
2006 SG TOM replacement
« on: July 23, 2009, 04:14:01 PM »
I'm planning on replacing the TOM bridge on my riff raff equipped Gibson SG Standard with a callaham model

what i need to know is do i need the ABR-1 style posts or the Nashville conversion posts?

and can any of you knowledgeable chaps point me in the direction of a good aluminium tailpiece?

Thanks  :D


  • Light Heavyweight
  • ******
  • Posts: 10528
Re: 2006 SG TOM replacement
« Reply #1 on: July 23, 2009, 04:32:52 PM »
A Gotoh tailpiece will do you well  ;)

I think you'll want a Nashville conversion post as your guitar will have a Nashville bridge as stock.

Philly Q

  • Light Heavyweight
  • ******
  • Posts: 18109
Re: 2006 SG TOM replacement
« Reply #2 on: July 23, 2009, 04:42:35 PM »
You need to look at the way the bridge is attached to the body.  The ABR-1 posts are made of threaded rod, screwed straight into the wood of the body:

The Nashville bridge is a bit wider (from front to back) and doesn't have a wire holding down the saddles.   The posts screw into metal bushings pressed into the body:

On a 2006 SG Standard I think it'll probably be a Nashville bridge.

For an aluminium tailpiece, you can't go wrong with Gotoh:

That's a nickel one, but you can also get them in chrome and other finishes, there are usually some on eBay (at cheaper prices too).  If you want a locking version, there's TonePros, but they're modified Gotoh parts anyway:

BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM


  • Middleweight
  • *****
  • Posts: 5264
Re: 2006 SG TOM replacement
« Reply #3 on: July 23, 2009, 06:04:21 PM »
You're better off with a Nashville style bridge.

Every ABR-1 bridge will start to rattle sooner or later.
BKP user since 2004: early 7K Blackguard 50


  • Guest
Re: 2006 SG TOM replacement
« Reply #4 on: July 23, 2009, 09:37:47 PM »
Thanks for all the info gents.

I installed a Callaham bridge into my Strat last year and the improvement in tone was considerable, so hopefully the combination of the ABR-1 and aluminium tail piece will have a similarly positive effect on the SG.

Now to look into some caps.  :)