• Welcome to Bare Knuckle Pickups Forum.
 

Jackson Dk2m Dinky Used off eBay

Started by ReverseHeadStock, February 06, 2008, 02:33:19 AM

Previous topic - Next topic

ReverseHeadStock

I just got a DK2M dinky guitar off eBay, I always wanted to play around with a Floyd Rose bridge and it was 400 $ US, so I thought it was a pretty good deal. (It looks bad ass too :))
Anyways, I messed around with it for a while and the strings went out of tune :(, maybe it's because it's a licensed Floyd Rose, I read about it and the one this guitar has a Low Profile Licensed bridge, and I was wondering if the Original Floyd Rose would fit in the guitar?(Considering to get an original or Ping/Schaller made :))
Or would I have to cut more of the wood??
Thanks!!

Kang

ozzuk

It might be that the bridge is not level and that means it will not stay in tune if you dive, I need to write up a Floyd tuning guide I have written a guide over on shredaholic.com in the tech section check that out it may help you with the Floyd tuning instabillity...

I have had zero problems with my schaller and gotoh unit's...

The licensed vibrato's can be finicky my LTD one was a bit arkward to tune but once it was tuned  was fine my amverick F1 is a bit finicky aswell but fine when sorted...

www.shreadaholic.com go to the tech section and look for the floyd guide..

ReverseHeadStock


silentrage

I had the same problem with a kramer I bought off ebay.
Later I took off the back cover and found that of the 5 springs that were supposed to be there, there were 4, that made it off balance. As soon as I took 1 out, it was a lot better and only went slightly out of tune when I used it.

I suspect that has to do with the knives being too worn down, as the guitar is made in 85.

So maybe you have a similar problem?

p.s. can anyone confirm my knives theory? :)

Transcend

i always use only 3 springs on guitars with floyds.

also this may sound stupid but did you lock all the nuts?

i didnt when i got my first guitar witha  floyd it drover me mad till i realised how stupid i was.

ReverseHeadStock


JDC

Quote from: silentrageI had the same problem with a kramer I bought off ebay.
Later I took off the back cover and found that of the 5 springs that were supposed to be there, there were 4, that made it off balance. As soon as I took 1 out, it was a lot better and only went slightly out of tune when I used it.

I suspect that has to do with the knives being too worn down, as the guitar is made in 85.

So maybe you have a similar problem?

p.s. can anyone confirm my knives theory? :)

I've heard the knives wear out from adjusting action without loosening the string, which might explain why my RR3 goes slightly sharp after I pull up the bar or stays slightly flat if I dive

not that I can even use the bar now because I rusted the inside of the hole it goes in, arrrrr!!!!

Transcend

Quote from: JDC
Quote from: silentrageI had the same problem with a kramer I bought off ebay.
Later I took off the back cover and found that of the 5 springs that were supposed to be there, there were 4, that made it off balance. As soon as I took 1 out, it was a lot better and only went slightly out of tune when I used it.

I suspect that has to do with the knives being too worn down, as the guitar is made in 85.

So maybe you have a similar problem?

p.s. can anyone confirm my knives theory? :)

I've heard the knives wear out from adjusting action without loosening the string, which might explain why my RR3 goes slightly sharp after I pull up the bar or stays slightly flat if I dive

not that I can even use the bar now because I rusted the inside of the hole it goes in, arrrrr!!!!

a rounded file will fix that for you

dave_mc

Quote from: JDC
I've heard the knives wear out from adjusting action without loosening the string,

don't think so...