• Welcome to Bare Knuckle Pickups Forum.
 

Problem with my Laney

Started by Stevepage, March 30, 2008, 08:50:32 PM

Previous topic - Next topic

Stevepage

Hey guys. For some reason I'm not getting any sound out of my Laney VH100R. All the leads and connections are fine. But when I twiddle with the lead in the input it sounds like I'm messing with a kill switch. I've tried different leads, different guitars but the problem persists.

The valves look fine to me. What else could it be?

Simon D

Could be a fault with the input jack, or a loose connection to it. Is it the same on both channels? That could rule out it being a problem with the master volume.
Warpigs.

Stevepage

Now I'm confused. I just turned the amp back on and it's working  :?  wtf

Simon D

Amps are funny creatures, i guess  :wink: . I wouldn't worry about it too much, unless you gig with it of course.
Warpigs.

Stevepage

I don't just yet. I only use it for rehearsals. Luckily I have a back up plan if the amp decides to die on me. It's due for a revalve soon so I'll get the tech to give it a check over.

greg

It could be an issue with FX send/return jacks. A quite often fault in guitar amps. Next time if it happens try to patch FX loop with a short jack lead. Remember there is actually a few FX loops in the VH100, so try all of them.

HTH AMPS

Quote from: gregIt could be an issue with FX send/return jacks. A quite often fault in guitar amps. Next time if it happens try to patch FX loop with a short jack lead. Remember there is actually a few FX loops in the VH100, so try all of them.

^ +1

exactly what I was about to suggest.  you could get the jack sockets replaced (fairly expensive if you have to pay for someone to do this) or just put a short patch lead between the send/return and that will sort it out (assuming this is the problem of course)
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall