• Welcome to Bare Knuckle Pickups Forum.
 

Dumb Question about Tele Bridge

Started by MrBump, March 21, 2009, 09:30:35 AM

Previous topic - Next topic

MrBump

Does a tele bridge need to be grounded?  I've grounded a strat bridge before, and a TOM...  Do I just solder a wire directly to the underside of the bridge then to the back of the volume pot?

Mark.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

Tellboy

#1
Yes it will need to be grounded. I think my teles have a hole under the bridgeplate  and a piece of bare wire connected to the volume pot. The wire is wound in a 'curly whirly' at the end and the bridge plate just sits on it when it is screwed down - no need to solder providing everything is clean and has a good contact.
John Suhr - "Practice cures most tone issues"
Crawler,Mule,Apache,Piledriver,Bl. Guard,Cold Sweat

MrBump

BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

Philly Q

Agreed, but having said that, you will find (vintage-style) Teles with no ground wire or hole under the bridge.

That's because if it's the type of Tele pickup with a metal baseplate, the baseplate is grounded and connected to the metal bridge by metal screws... so the strings are grounded via the pickup baseplate.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

AndyR

+1 to all

Bridges/strings need grounding.

But if your tele bridge pickup has a metal baseplate you don't need an extra wire.
Play or Download AndyR Music at [url="http://www.alonetone.com/andyr"]http://www.alonetone.com/andyr[/url]

tomjackson

I just rubbed some of the finish off the back of the bridge and put a bare wire underneath when I screwed the bridge down, then connected to ground.  That works fine....

hunter

Quote from: Philly Q on March 21, 2009, 11:15:38 AM
Agreed, but having said that, you will find (vintage-style) Teles with no ground wire or hole under the bridge.

That's because if it's the type of Tele pickup with a metal baseplate, the baseplate is grounded and connected to the metal bridge by metal screws... so the strings are grounded via the pickup baseplate.

You are a walking guitar encyclopedia Phil!
Tweaker's Paradise - Player's nightmare.

Philly Q

Quote from: hunter on March 28, 2009, 09:42:06 AM
Quote from: Philly Q on March 21, 2009, 11:15:38 AM
Agreed, but having said that, you will find (vintage-style) Teles with no ground wire or hole under the bridge.

That's because if it's the type of Tele pickup with a metal baseplate, the baseplate is grounded and connected to the metal bridge by metal screws... so the strings are grounded via the pickup baseplate.

You are a walking guitar encyclopedia Phil!

Thanks CJ, but if only that also applied to my playing :( .   I'd like to be a walking riff-opedia.  :)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

MrBump

Thanks for all the replies, chaps -- Tele is now all built (earth wire shoved under the bridge, just in case), and all sounding damn fine!!!

Mark.
BKPs Past and Present - Nailbombs, Mules, Blackguard Flat 50's, VHII's & Trilogy Suite with Neck & Bridge Baseplates!

Fourth Feline

Quote from: MrBump on March 28, 2009, 10:38:05 PM
Thanks for all the replies, chaps -- Tele is now all built (earth wire shoved under the bridge, just in case), and all sounding damn fine!!!

Mark.

I also had to add a (tailpiece ) earthing wire to my recent Jazz guitar aquisition . With a ' floating' wooden bridge ,  the tailpiece / strings needed earthing to the back of a pot for optimum results.