• Welcome to Bare Knuckle Pickups Forum.
 

How many coats of tru oil for a neck?

Started by tomjackson, January 04, 2010, 02:59:23 PM

Previous topic - Next topic

tomjackson


I've done 3, looks okay but should I do a few more?

Cheers
Tom

Twinfan

I did 3 (I think!) on mine, and it was fine.  Wez said so, so it must be true!

FELINEGUITARS

Good question and it depends on the kind of finish that you want ad whether you used Wire wool between each coat to knock it back

I will often do as many as 20+ coats but knock the finish back afetr every couple with 0000 grade wire wool

the last 3 or 4 coats will be left for several days or longer before smoothing back to allow it to really harden up
[url="//www.felineguitars.com"]www.felineguitars.com[/url] - repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!

tomjackson

Thanks fellas!

Yes Feline I sand back after every coat with Liberon 0000.  I think I'll do it every other for a few more coats then leave a couple to harden at the and as you say.

I don't know what finish I'm after, thin but durable I guess.

Dave, have you had any signs of playing wear from the 3 coats on your neck?  I think I'll end up with about 10 in total.

Philly Q

Quote from: FELINEGUITARS on January 04, 2010, 03:38:27 PM
Good question and it depends on the kind of finish that you want ad whether you used Wire wool between each coat to knock it back

I will often do as many as 20+ coats but knock the finish back afetr every couple with 0000 grade wire wool

the last 3 or 4 coats will be left for several days or longer before smoothing back to allow it to really harden up

Slightly off-topic, but on a body, would you still use wire wool?  Or would you use wet/dry paper on a sanding block to keep the finish flat?
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Twinfan

Quote from: tomjackson on January 04, 2010, 04:06:58 PM
Dave, have you had any signs of playing wear from the 3 coats on your neck?  I think I'll end up with about 10 in total.

Nope, but then it's not had serious use.  I just wanted it sealing so it still felt like raw maple - not a 'finish' as such.

WezV

3 coats and a rub back is a light oil finish and will show signs of playing wear eventually and may also need a little more mainetnance to keep it feeling nice, just the occasional re-oil and rub down.. its as raw a maple neck as i do.  10 coats of tru-oil is much more like a full finish
[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

tomjackson

Quote from: Philly Q on January 04, 2010, 05:49:04 PM
Quote from: FELINEGUITARS on January 04, 2010, 03:38:27 PM
Good question and it depends on the kind of finish that you want ad whether you used Wire wool between each coat to knock it back

I will often do as many as 20+ coats but knock the finish back afetr every couple with 0000 grade wire wool

the last 3 or 4 coats will be left for several days or longer before smoothing back to allow it to really harden up

Slightly off-topic, but on a body, would you still use wire wool?  Or would you use wet/dry paper on a sanding block to keep the finish flat?

I used wire wool on mine, the finish should already be flat enough before you start using wire wool.  the 0000 grade is more of a polisher than a sander so if the finish is already flat I don't think the wire wool would change that.

the finish on my swamp ash Tele body is pretty raw and open grained though

WezV

oh, yeah.  i would wire wool the body too.   what tom says is spot on

for an example here is Roo's guitars with about 6 coats of tru oil going over bubinga, maple and wenge and polished out with the liberon wire wool

[url=http://www.wezvenables.co.uk]www.wezvenables.co.uk[/url]

Philly Q

BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM