• Welcome to Bare Knuckle Pickups Forum.
 

Help! Whys my Humbucker Humming?

Started by dragonfire709, January 31, 2010, 07:48:13 PM

Previous topic - Next topic

dragonfire709

Let me first start by saying that even though i worked in the PCB industry for 5 years i'm not the brightest spark when it comes to wiring. Anyway, I've been eyeing up my old Epi SG Custom recently and thought I'd have a bit of a tinker. I've stuck an old Ibanez humbucker in the bridge position to try to hot it up a bit. I wired up the wires like for like but am left with 1 black wire with nowhere to go.

I presume this is a ground (hence why its humming). My question is where do I ground it to?

Thanks

Roy
[url="//www.onedgerock.co.uk"]www.onedgerock.co.uk[/url]

Nailbomb, Painkiller & Mule's.

Afghan Dave

Usually the back of the same pot where the output jack is currently grounded.
"There's more knowledge on these boards than there are necks under PhillyQ's bed"

dragonfire709

Cheers Dave-will have a look and see if i can get the old girl rocking again!
[url="//www.onedgerock.co.uk"]www.onedgerock.co.uk[/url]

Nailbomb, Painkiller & Mule's.

Insightibanez

I had the same problem so I grounded it to my bridge. It helped but I can still hear a slight hum.
Either you got it, or you dont!!!!