Modding Pickup Lugs

[Dazza1004]

Has anyone modded the lugs on a BKP humbucker ?

I have lost patience with the Aldrich set in my Suhr, I have a HD set but the lugs are square and I need triangular as the suhr is top mounted.

I'm sure it's not a big job but I am a bit worried I may screw it up and end up with a set of useless BKP's....

cheers

[WezV]

yeah, just carefully trim them down.   worst that can happen is you break it - but even if that happens tim will put a new base on for a very reasonable price

if you are carefull you wont have problems

i usually snip till close, then cover the p-up with masking tape before filing it neater.. then clean all the metal bits off the tape before removing it

[Dazza1004]

thanks Wes.

[Philly Q]

i usually snip till close, then cover the p-up with masking tape before filing it neater.. then clean all the metal bits off the tape before removing it

I've done exactly the same - not difficult at all and turns out fine.

[Dazza1004]

cheers Phil, I'm working up the courage to give this a go