• Welcome to Bare Knuckle Pickups Forum.
 

acoustic foam for 4x12

Started by HTH AMPS, May 24, 2011, 11:19:36 AM

Previous topic - Next topic

HTH AMPS

anyone know where to get this stuff? - you see older Marshall 4x12s lined with acoustic foam and I'm gonna try this (IF I can find the stuff).

anyone?
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

blue

what effect is it supposed to have?
cry HAVOC!! and let slip the pigs of war!!!

Brow

I use it to sit underneath my amp and between the top of the cab, to stop vibrations at high volume, but have never used it inside a cab before.
Selling lots of gear, enquire within!......

Dmoney

#3
the uberkab does something similar. it uses roughly 30mm thick dacron on the rear panel. when I spent some time reading into this, the idea seemed to be that it reduces standing waves in the cab, and somehow artificially creates the effect of having a bigger cab. dunno if that's true. been a while since I read anything about it, and most of what I read was on various forums so to be taken with a pinch of salt


edit. try blue aran for foam. I think that's how it is spelled

Deadstar

Just use a medium density fibreglass that you can get in B&Q (or enter preferred hardware store here.....)

It'll do the same job (if not a better one), though only prevents standing waves down to a certain frequency, it's about mass against porous and elastic properties. You could experiment with using a more rigid high density type normally used in acoustic panelling for a stronger effect, though you might find it harder to install as it won't stuff like that rolled packs do.

I should really do a quick article on how to make acoustic panelling really easily, I find most of the companies rip you off for something you can do easily yourself with barely any effort.

"The secret to creativity is knowing how to hide your sources." -Einstein

HTH AMPS

Quote from: Dmoney on May 24, 2011, 01:47:50 PM
the uberkab does something similar. it uses roughly 30mm thick dacron on the rear panel. when I spent some time reading into this, the idea seemed to be that it reduces standing waves in the cab, and somehow artificially creates the effect of having a bigger cab. dunno if that's true. been a while since I read anything about it, and most of what I read was on various forums so to be taken with a pinch of salt

edit. try blue aran for foam. I think that's how it is spelled

Thats my understanding too.  I want to put it in my 1x12 I use for gigging mainly - see how much 'bigger' the cab sounds.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall