• Welcome to Bare Knuckle Pickups Forum.
 

Negative feedback

Started by sgmypod, June 26, 2011, 07:09:52 PM

Previous topic - Next topic

sgmypod

Been using my mates champ sounds a little sweeter than mine was wondering if I could change mine to more champ like by changing negative feedback part of it am guessing is part ringed in my pic
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

HTH AMPS

you'll have to remove the bypass cap from the 1K resistor if you want to use NFB.

alternatively, you could add a 470ohm resistor in line with the existing 1k/0.1 combo to ground and insert the NFB there (thats the way I'd do it).

[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

sgmypod

ahh thought already had NFB as there connected to the grounding tag
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

HTH AMPS

looks like you have a DI out there, right? - a schematic would be easier to read, I hate layouts.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

jpfamps

Can't see any evidence of negative feedback around the power stage.

As HTH says, it looks like a DI out.

[url="//www.jpfamps.com"]www.jpfamps.com[/url]

sgmypod

Here is schematic...didn't think I had this
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

jpfamps

Yep, no negative feedback.

[url="//www.jpfamps.com"]www.jpfamps.com[/url]

sgmypod

Is it possible to do frank (been a while since touched an amp)
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee

HTH AMPS

its possible - follow the instructions in my post above.

actually, I've drawn up an alteration to your schematic.

oh, and use a 47ohm resistor, not 470ohm as I said earlier.
[url="//www.youtube.com/TeleCustom72"]www.youtube.com/TeleCustom72[/url]
www.soundclick.com/bands/default.cfm?bandID=876738
www.facebook.com/pages/HTH-Amplification/263958270289235?sk=wall

sgmypod

#9
so main difference is adding 47ohm resistor(to ground inbetween bit I highlighted originaly) and the 33k feedback resistor to the 16ohm output going to headphone di

what wattage do I need on these
Autotune My Arse

Crawler,nailbomb & Ltd Ed Emeralds, apache, now riff raff..EX- N/bomb, IT, Mquee