• Welcome to Bare Knuckle Pickups Forum.
 

fitting a tapped p-90 without fitting the tap?

Started by sambo, February 02, 2006, 05:55:54 PM

Previous topic - Next topic

sambo

is it ok to fit a tapped p-90 without actually wiring the tap so i can use it until i buy a push/pull pot..?

PhilKing

Yes, just decide which sound you want (probably the full output), and insulate the tap wire.
So many pickups, so little time

sambo

ok thanks phil. ive done that now but how exactly do you choose which sound you want then????

PhilKing

You have to try both.  You can take the wire out through the jack socket before you solder it, and try wiring each.  See which works best for you.
So many pickups, so little time

sambo