November 20, 2026, 01:52:39 AM
Main Menu
Main Menu
Home
Search
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
3 Way Blade Switch Wiring Question
3 Way Blade Switch Wiring Question
Started by SamD, November 16, 2012, 01:41:08 PM
Previous topic
-
Next topic
Print
Go Down
Pages
1
User actions
SamD
Strawweight
Posts: 4
Logged
3 Way Blade Switch Wiring Question
November 16, 2012, 01:41:08 PM
So I've swapped out the Blackouts in my Schecter Blackjack ATX-C1 for a set of Cold Sweats :D.
However, When I went to wire the 3 way blade switch, I noticed it was dramatically different to the BKP wiring diagram.
I have 2 volumes and 1 push-pull tone knob, and I'm using this wiring diagram (
https://bareknucklepickups.co.uk/main/downloads/schematics/general/humbuckers/2_hum__2_vol__1push_pull_tone_coilsplit__3_way_blade_switch.pdf
) except my switch looks like this (
http://www.guitarpartsonline.com/gpoebay/3way3.jpg
)
Can anyone help me with how to wire the 3 way switch to match the BKP schematic? I have followed everything else in the BKP schematic.
Thanks for any of your help!
SamD
Strawweight
Posts: 4
Logged
Re: 3 Way Blade Switch Wiring Question
#1
November 16, 2012, 02:20:45 PM
I just found this diagram, I think it should work? I'll give it a go tomorrow.
http://www.neighborhost.com/images/5-way_conversion01.png
SamD
Strawweight
Posts: 4
Logged
Re: 3 Way Blade Switch Wiring Question
#2
November 17, 2012, 01:34:54 AM
Tried using this method and it's still not working. The pickups and coil splitting are working fine, but moving the switch does nothing-almost like it's just going straight through.
SamD
Strawweight
Posts: 4
Logged
Re: 3 Way Blade Switch Wiring Question
#3
November 17, 2012, 03:52:00 AM
Ended up just cutting the jumpers between each pair of leads, it works perfectly now!!
These pickups sound AMAZING!!! The coil tapping sounds great too! Who would've thought you could get strat-ish tones from a Schecter ;)
Print
Go Up
Pages
1
User actions
Bare Knuckle Pickups Forum
►
Forum Ringside
►
Tech
►
3 Way Blade Switch Wiring Question
User actions
Print