Username:
Password:
BKP Home
Home
Help
Search
Login
Register
Bare Knuckle Pickups Forum
»
Forum Ringside
»
Guitars, Amps and Effects
»
Rack Case causing hum
« previous
next »
Print
Pages: [
1
]
Author
Topic: Rack Case causing hum (Read 1998 times)
maliciousteve
Guest
Rack Case causing hum
«
on:
June 22, 2006, 01:50:33 PM »
Hey, Everytime i got to screw my power amp back into the rack case i get an annoying hum. When i loosen the screws the hum goes, when i tighten them up, the hum comes back. I've never ever heard of this before, how can i fix this problem? :(
Logged
Andy RV
Flyweight
Posts: 90
Rack Case causing hum
«
Reply #1 on:
June 22, 2006, 02:12:02 PM »
I've heard that you can get these little rubber pads that you put between the the rack mounting plate and the mounts on the unit, they stop the metal touching, thus stopping the rack case conducting any power from the unit.. or something along those lines.
Check out
http://www.hugeracksinc.com/board/
the are loads of rack nerds over there that will have a easy solution for you.
Logged
FELINEGUITARS
Middleweight
Posts: 6609
London & Southeast's Number 1 BKP stockist
Rack Case causing hum
«
Reply #2 on:
June 22, 2006, 02:49:50 PM »
Yeah - they were called humfrees
Small plastic clips that go between the rack ears and the flightcase and isolate the chassis
Also be careful to mak sure power cables and signal cables dont cross or run alongside each other- the signal cable picks up hum fro the mains cable
Logged
www.felineguitars.com
- repairs & custom built
Great fretwork!
Buy your BKPs & Earvana from ME!
Print
Pages: [
1
]
« previous
next »
Bare Knuckle Pickups Forum
»
Forum Ringside
»
Guitars, Amps and Effects
»
Rack Case causing hum