• Welcome to Bare Knuckle Pickups Forum.
 

How do I mesaure the DC resistance of my pups?

Started by Twinfan, March 09, 2007, 10:14:22 AM

Previous topic - Next topic

Twinfan

As the title says really!  I guess I need a multimeter of some sort?  Do the pickups need to be wired into the guitar to be tested?

I'm just curious to see how all my pups compare across guitars  :D

hunter

multimeter will do, if you turn all volumes and tones up, you can measure the Ohms at the guitar cable or sth.

Works fine.

But note that the resistance is not the same as output, I have pickups that have 13KOhm and feel like less hot than others I have with 9KOhm - at least that is my perception.
Tweaker's Paradise - Player's nightmare.

Philly Q

Quote from: TwinfanDo the pickups need to be wired into the guitar to be tested?
No, you can test on a straight-from-the-box pickup.  You can test the individual coils of humbuckers too.



At least... I think you can, I'm sure I've tested pickups in the past.  Unless the memory's playing tricks again.   :?   I'll try when I get home.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Twinfan


Tim

The only way you'll get a true DC reading is when the pickup is not connected to anything.Use a good multimeter, set to ohms, and read across hot and screen on braided hook up or red and black on 4 con.
Taking a reading off a jack or from the control cavity will not give a true reading as pots/cable etc all add resistance.
DC13K vs DC9K...............aha the great DC res mystery!
DC res is only a very rough guide to output and then only on pickups wound with the same gauge wire.So a VHII for example wound with 42 AWG plain enamel @DC9.2K can easily sound as loud as an Emerald DC13.1K wound with 43AWG-the reality is the number of turns between the two isn't that different but the combination of wire gauge, wire tension and coil size/shape produces a quite different tonal response from each pickup.
Tim
BKP - "Wound, made and played the traditional way --- by hand!" Amen.

Philly Q

I just measured my (unconnected) Stormy Monday and Black Dog - 7.3K and 9.5K.  Not exactly the same as the "official" numbers on my warranty cards, but I only have a cheapo multimeter.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Tim

Tim
BKP - "Wound, made and played the traditional way --- by hand!" Amen.

Twinfan

Cheers again folks - will get hold of a multimeter!

hunter

Quote from: TimRemeber DC res is temperature sensitive!

Is resistance lower when temperature is higher or the other way round?

My logic would say higher temp = lower resistance as materials should transport current better in higher temperatures ...?
Tweaker's Paradise - Player's nightmare.