• Welcome to Bare Knuckle Pickups Forum.
 

wiring - please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Started by guitargod1, October 14, 2006, 05:08:07 PM

Previous topic - Next topic

guitargod1

What is a good wiring to go from 2 bare knuckle nailbombs, to a 3 way selector switch, to a master volume and then to a master tone with coil tap on it for both pups?
hello me its me again!

PhilKing

You could put push-pull pots on the vol and tone and then just use a normal gibson style 3 way selector.  Check out //www.guitarelectronics.com for other diagrams.
So many pickups, so little time

guitargod1

sorry i didn't make myself clear i forgot to mention the 3 way selector switch
sorry  :wallbash:
hello me its me again!

Philly Q

You mean a Gibson-style 3-way toggle switch or a Fender-style 3-way slider switch?

If it's a Fender type, why not replace it with a 5-way "superswitch" and use one of the wiring setups Phil K has kindly provided on this thread?:

http://www.bareknucklepickups.co.uk/forum/viewtopic.php?t=5604
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

guitargod1

hello me its me again!

Philly Q

I'm reluctant to plug Seymour Duncan on the BKP forum, but here's a good diagram from the SD website:

http://www.seymourduncan.com/support/schematics/2h_1v_1t_3w_1pp.html

It uses 1 vol, 1 tone and a 3-way switch.  The push-pull on the volume pot splits both pickups at the same time, but you could make the push-pull the tone control if you wanted.  Or use two push-pulls as Phil King suggested, one to split each pickup.

Just remember the BKP equivalent of Duncan's Black/White/Red/Green colour coding is Red/Green/White/Black.

Phil
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM